PJME - Motorcycle Engineers , 2 stroke engine specialist aprilia cagiva
homeAbout UsShipping & ReturnsContact UsNewsForumlogin twitterfacebook
You Are Here: Online Parts Store > Road Bike Parts > Suzuki Parts > Suzuki RGV 250  > Suzuki RGV 250 Bottom End Engine Parts
online store

Cylinder Re-Sleeving
Cylinder Re-Coating
Cylinder Re-Boring
Crankshaft Rebuilding
Thread Repairs
Engine Rebuilding
Job Packing

Suzuki RGV250 Centre Crank Seal
Suzuki RGV250 Centre Crank Seal
34.99
41.99
find out more

Aprilia RS250 Centre Crank Bearing
Aprilia RS250 Centre Crank Bearing
24.99
29.99
find out more

Aprilia RS125 Moto RRT Tail Tidy 2006-2014
Aprilia RS125 Moto RRT Tail Tidy 2006-2014
46.80
56.16
find out more

Kawasaki KX250 Koyo Crankshaft Main Bearings 1987-2002
Kawasaki KX250 Koyo Crankshaft Main Bearings 1987-2002
27.80
33.36
find out more

Aprilia RS125 Neutral light sensor
Aprilia RS125 Neutral light sensor
31.55
37.86
find out more

 

Suzuki RGV 250 Bottom End Engine Parts



Suzuki RGV250 Crankshaft Assembly

Suzuki RGV250 Crankshaft Assembly

Suzuki RGV250 Complete Crankshaft To Fit The Suzuki RGV 250 VJ22 N,M,P,R and T Models.

The Crank On The Suzuki RGV250 Is A Highly Stressed Part, Although We Offer A Crank Rebuilding Service On The RGV250 Most Cranks We Get Are So Worn that They Are Past Rebuilding. This Is due To The Drive Side Crank Web Having An Integral Crank Pin And Suzuki Does Not Sell This Part, The Other Problem Is The Centre Shat Can Suffer Damage Due The Centre Main Bearing Spinning on the shaft.

For This Reason We Offer A Complete Crankshaft From Suzuki

Genuine Suzuki Part Number 1220022D11


Price: 587.27 (704.72 Including VAT at 20%)


Quantity:  






Suzuki RGV250 Full Gasket Set Budget

Suzuki RGV250 Full Gasket Set Budget

Suzuki RGV250 Full Gasket Set, Fits All Years Of The Suzuki RGV250 Fits Both VJ21 And VJ22 Models

Photo Is What You Get In The Kit

Made In Taiwan
Price: 26.25 (31.50 Including VAT at 20%)



Quantity:  






Suzuki RGV250 Full Gasket Set Athena

Suzuki RGV250 Full Gasket Set Athena

Full Gasket Set To Fit The Suzuki RGV 250 1989-1999 VJ21 And VJ22 Models

This Kit Is Made In Italy By Athena And Is A Better Quality One Than The Budget One We Sell Which Is Made In Taiwan. "Why is it better i hear you say" Well the gaskets are made from the same material as the factory original ones, the gasket material is better than the Taiwanese one and fits much nicer.

Base Gasket Thickness is 0.50 mm Un compressed

Head Gasket Thickness is 1.20 mm Un compressed

Made In Italy By Athena


Price: 33.18 (39.82 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. 717L GPGEL Pro Grip Gel Gp Race Grips
2. Aprilia RS125 Oil Pipe Joint
3. Suzuki RGV250 Sprocket Bearing Retaining Plate Gasket



Customer Reviews

  Good cheap alternative to OEM  I have used this kit for two seasons without any issues at all. The quality seems to be on par with the oem items.   (05/11/2013) Fredrik Frostad - Norway



Suzuki RGV250 Crank Shaft Primary Drive Tab Washer

Suzuki RGV250 Crank Shaft Primary Drive Tab Washer

Crankshaft Primary Drive Tab Washer To Fit The Suzuki RGV250 Fits VJ21 And VJ22 Engines.

Genuine Suzuki Part Number:0916612002.


Price: 1.82 (2.18 Including VAT at 20%)


Quantity:  






Suzuki RGV250 Clutch Cover Gasket Athena Quality

Suzuki RGV250 Clutch Cover Gasket Athena Quality

Clutch Cover Gasket For The Suzuki RGV 250 VJ21 And VJ22

Perfect If your Just Working on the Clutch Side Of Your Engine

Made In Italy By Athena


Price: 4.78 (5.74 Including VAT at 20%)



Quantity:  






Suzuki RGV250 Sprocket Bearing Retaining Plate Gasket

Suzuki RGV250 Sprocket Bearing Retaining Plate Gasket

This Gasket fits behind the sprocket bearing retaining plate on the Suzuki RGV250

Note This gasket does not come in any gasket kits

Suzuki Part Number 24752-22D00
Price: 5.50 (6.60 Including VAT at 20%)


Quantity:  




People who bought this item also bought:
1. 717L GPGEL Pro Grip Gel Gp Race Grips
2. Aprilia RS125 Oil Pipe Joint
3. Aprilia RS250 Sprocket Carrier Bearing All Years



Suzuki RGV250 Con Rod Kit

Suzuki RGV250 Con Rod Kit

Replacement Con Rod Kit To Fit The Suzuki RGV250

You Get 1 Con Rod, 1 Big End Bearing, 1 Crank Pin, And 1 Small End Bearings.

Made In Japan By Long (Long Alos Make Con Rods For Prox, Suzuki, Yamaha ETC)

Price Is Per Con Rod
Price: 42.53 (51.04 Including VAT at 20%)



Quantity:  






Suzuki RGV250 Con Rod Kits

Suzuki RGV250 Con Rod Kits

Pair Of Replacement Con Rod Kits To Fit The Suzuki RGV250 VJ21 And VJ22 Models

Made In Japan By Long (Long Alos Make Con Rods For Prox, Suzuki, Yamaha ETC)

You Get 2 Con Rods, 2 Big End Bearings, 1 Crank Pin, And 2 Small End Bearings.


A:28.00mm B: 20.00mm C: Con Rod Length 105mm D: 16.40mm E:16.40mm F:22.00mm G:48.50

This Part Will Also Fit The Following Model Bikes.

RGV250 VJ21 RGV 250 VJ22

Sorry There Is No Spare Parts Associated With This Product


Price: 85.06 (102.07 Including VAT at 20%)



Quantity:  






Suzuki RGV250 Centre Crank Bearing

Suzuki RGV250 Centre Crank Bearing

Centre Crank Bearing To Fit The Suzuki RGV250 Fits All Years Of The Suzuki RGV 250 Both VJ21 And VJ22

This Is the Correct Centre Bearing To Fit The Suzuki RGV 250. This Bearing Is No Longer Available From Suzuki, But We Have Sourced Them Direct From Japan.

The Sizes Are 25x62x18 The Bearing Is Made By Koyo In Japan.

Note It is the 18mm width that makes this bearing special, all off the shelf bearings are only 17mm wide, please check before comparing prices.


Price: 24.99 (29.99 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. Yamaha RD350LC TZ Style Big End Bearing



Suzuki RGV250 Outer Crank Bearing Drive Side RH

Suzuki RGV250 Outer Crank Bearing Drive Side RH

Drive Side Crankshaft Main Bearing To Fit The Suzuki RGV250, This Fits Both VJ21 & VJ22 RGV 250

The Bearing is located On The Outer Part Of The Crankshaft On the RH Side Of The Engine

The Bearing Is Made In Japan By Koyo And Is Exactly The Same As The One Suzuki Supply.

Suzuki Part Number 09262-25097
Price: 15.99 (19.19 Including VAT at 20%)


Quantity:  






Suzuki RGV250 Outer Crank Bearing Timing Side LH

Suzuki RGV250 Outer Crank Bearing Timing Side LH

Timing Side Crankshaft Main Bearing To Fit The Suzuki RGV250, This Fits Both VJ21 & VJ22 RGV 250

The Bearing is located On The Outer Part Of The Crankshaft On the LH Side Of The Engine

The Bearing Is Made In Japan By Koyo And Is Exactly The Same As The One Suzuki Supply.

Suzuki Part Number 09262-25098
Price: 18.99 (22.79 Including VAT at 20%)


Quantity:  






Suzuki RGV250 Centre Crank Seal

Suzuki RGV250 Centre Crank Seal

Suzuki RGV250 Centre Crank Seal Also Known As A Labyrinth Seal

This Is the Correct Centre Seal To Fit The RGV 250 VJ21 VJ22. This Seal Is No Longer Available From Suzuki, But We Have Had Them Made For Us.

Made In Japan

Brand Moto RRT M.0018


Price: 34.99 (41.99 Including VAT at 20%)


Quantity:  






Suzuki RGV250 Big End Bearing

Suzuki RGV250 Big End Bearing

Replacement Big End Bearing For The Suzuki RGV250, Fits All Models and years Of The RGV 250 Inc VJ21 & VJ22 Models.

The Big End Bearing Is A Silver Plated Flat Bar Race Type.

Replaces Suzuki Part Numbers 0926322060 & 09263-22047-0C0

Price Is For 1 Big End Bearing


Price: 18.75 (22.50 Including VAT at 20%)


Quantity:  






Suzuki RGV250 Big End Bearing Thrust Washer #11

Suzuki RGV250 Big End Bearing Thrust Washer #11

Big End Bearing Thrust Washer For The Suzuki RGV250 , Fits All Models and years Of The RGV 250 VJ21 And VJ22

There Are 1 of these washers on the Suzuki RGV 250 Crankshaft

Suzuki Part Number 09160 22071

Price Is For 1 Washer


Price: 6.27 (7.52 Including VAT at 20%)


Quantity:  






Suzuki RGV250 Big End Bearing Thrust Washer #10

Suzuki RGV250 Big End Bearing Thrust Washer #10

Big End Bearing Thrust Washer For The Suzuki RGV250 , Fits All Models and years Of The Suzuki RGV 250 Both The VJ21 & VJ22

There Are 3 of these washers on the Suzuki RGV250 Crankshaft

Suzuki Part Number 09160 22070

Price Is For 1 Washer


Price: 4.50 (5.40 Including VAT at 20%)


Quantity:  






Suzuki RGV250 Crank Seal LH

Suzuki RGV250 Crank Seal LH

Crank Seal Timing Side To Fit The Suzuki RGV250 All Years Both RGV 250 VJ21 VJ22

Suzuki Part Number 09283 25091
Price: 21.16 (25.39 Including VAT at 20%)



Quantity:  






Suzuki RGV250 Crank Seal RH

Suzuki RGV250 Crank Seal RH

Crank Seal Drive Side To Fit The Suzuki RGV250 All Years VJ21 VJ22

Suzuki Part Number 09289 32005
Price: 15.20 (18.24 Including VAT at 20%)



Quantity:  






Suzuki RGV250 Engine Oil Seal Kit Athena

Suzuki RGV250 Engine Oil Seal Kit Athena

Engine Oil Seal Kit To Fit The Suzuki RGV250, Fits All Years VJ21 VJ22

2 Crank Seals, 2 Power Valve Shaft Seals, 1 Sprocket Shaft Seal, 1 Gear Change Shaft Seal And Kick Start Shaft Seal.


Price: 42.00 (50.40 Including VAT at 20%)



Quantity:  






Suzuki RGV250 Clutch Plates 1988-90

Suzuki RGV250 Clutch Plates 1988-90

Set Of EBC Friction Clutch Plates To Fit The Suzuki RGV250 1988-1990
Price: 45.00 (54.00 Including VAT at 20%)



Quantity:  






Suzuki RGV250 Clutch Plates 1991-96

Suzuki RGV250 Clutch Plates 1991-96

Set Of EBC Friction Clutch Plates To Fit The Suzuki RGV250 1991-1996
Price: 45.00 (54.00 Including VAT at 20%)



Quantity:  






Suzuki RGV250 Heavy Duty Clutch Springs

Suzuki RGV250 Heavy Duty Clutch Springs

Set Of 10% Up- Rated EBC Clutch Springs For The Suzuki RGV250
Price: 7.99 (9.59 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. 717L GPGEL Pro Grip Gel Gp Race Grips
2. Aprilia RS125 Oil Pipe Joint
3. Suzuki RGV250 Sprocket Bearing Retaining Plate Gasket



Suzuki RGV250 Flywheel Puller

Suzuki RGV250 Flywheel Puller

Flywheel Puller To Fit The Suzuki RGV250.

This Tool Is Required To Remove The Flywheel On The Suzuki RGV250


Price: 17.38 (20.86 Including VAT at 20%)


Quantity:  






Suzuki RGV250 Clutch Holding Tool

Suzuki RGV250 Clutch Holding Tool

Clutch Holding Tool For The Suzuki RGV250, Fits All Years

Buzzett Universal Tool To Hold Clutch Hub Centres

Has Flat Notches To Fit Hub Will Open From 70 To 125 mm, Nice Tool And Much Better Than The Cheap "Mole Grip" Type Ones


Price: 17.60 (21.12 Including VAT at 20%)


Quantity:  






Suzuki RGV250 Oil Pipe 2mm x 5mm Black

Suzuki RGV250 Oil Pipe 2mm x 5mm Black

Suzuki RGV250 Oil Feed Pipe Black 2mm Bore x 5mm Outside Diameter

This Fits Between The Oil Pump And The Engine IE Cylinders And Crank Case Oil Feed Pipe

Supplied in 1m length
Price: 3.50 (4.20 Including VAT at 20%)


Quantity:  




People who bought this item also bought:
1. 717L GPGEL Pro Grip Gel Gp Race Grips
2. Oil Pipe 3mm x 5mm Clear
3. PJ1 Fast Black Gloss Finish 0753402



Suzuki RGV250 Oil Pipe 2mm x 5mm Clear

Suzuki RGV250 Oil Pipe 2mm x 5mm Clear

Suzuki RGV250 Oil Feed Pipe Clear 2mm Bore x 5mm Outside Diameter

This Fits Between The Oil Pump And The Engine IE Cylinders And Crank Case Oil Feed Pipe

Supplied in 1m length


Price: 3.50 (4.20 Including VAT at 20%)


Quantity:  




People who bought this item also bought:
1. Aprillia RS125 Dellorto 34mm Carburettor 2006 Onwards
2. Aprilia RS125 Oil Pipe Joint
3. Aprilia RS 125 Italkit Racing Reed Valve



Customer Reviews

  Good product  Fits perfect and holds up very good.   (05/11/2013) Fredrik Frostad - Norway


  Nice clear pipe  Fits like the original pipe!   (17/04/2013) -





PJ Motorcycle Engineers - Specialists in 2 Stroke Engines


Fuel Pipe 6.5mm Bore Purple
Fuel Pipe 6.5mm Bore Purple

6.75
8.10
find out more

Dellorto VHSB 34LD Pilot Jet
Dellorto VHSB 34LD Pilot Jet

7.95
9.54
find out more

Aprilia RS125 Moto RRT Oil Filler Plug Alloy Type
Aprilia RS125 Moto RRT Oil Filler Plug Alloy Type

5.99
7.19
find out more

Aprilia RS125 Carb Main Jet Dellorto 6mm
Aprilia RS125 Carb Main Jet Dellorto 6mm

4.68
5.62
find out more


PJME Home
About Us
Contact Us
Links Page
News
General Shipping & Returns Information
Privacy Policy
Online Security
Cagiva 125
Yamaha RD350 LC
Yamaha RD350 YPVS
Cylinder Re-Sleeving
Cylinder Re-Coating
Cylinder Re-Boring
Crankshaft Rebuilding
Engine Rebuilding
Cylinder Packing
Engine Packing
Aprilia RS125
Home | About Us | Shipping & Returns | Terms & Conditions | Contact Us | Site Map | Search | Links & Resources

© Copyright PJME 2008-2013

Actinic Web Design maintained by Hanson Web Design