PJME - Motorcycle Engineers , 2 stroke engine specialist aprilia cagiva
homeAbout UsShipping & ReturnsContact UsNewsForumlogin twitterfacebook
You Are Here: Online Parts Store > Motocross Moto-X Spare Parts  > Honda Motocross Parts > Honda CRF250R > Honda CRF250R Engine Parts Bottom End
online store

Cylinder Re-Sleeving
Cylinder Re-Coating
Cylinder Re-Boring
Crankshaft Rebuilding
Thread Repairs
Engine Rebuilding
Job Packing

Suzuki RGV250 Centre Crank Seal
Suzuki RGV250 Centre Crank Seal
34.99
41.99
find out more

Aprilia RS250 Centre Crank Bearing
Aprilia RS250 Centre Crank Bearing
24.99
29.99
find out more

Aprilia RS125 Moto RRT Tail Tidy 2006-2014
Aprilia RS125 Moto RRT Tail Tidy 2006-2014
46.80
56.16
find out more

Honda MTX125 Full Gasket Set Athena
Honda MTX125 Full Gasket Set Athena
20.41
24.49
find out more

Yamaha RD250LC Complete Crankshaft Assembly
Yamaha RD250LC Complete Crankshaft Assembly
315.00
378.00
find out more

 

Honda CRF250R Engine Parts Bottom End



Honda CRF250R Crankshaft 2004-2007

Honda CRF250R Crankshaft 2004-2007

Replacement Crankshaft To Fit The Honda CRF250R Years 2004 TO 2007

This Is A Brand New Crank Ready To Fit Into Your Honda CRF250R Engine.

Made By Mitaka


Price: 135.00 (162.00 Including VAT at 20%)



Quantity:  






Honda CRF250R Full Gasket Kit 2004-2007

Honda CRF250R Full Gasket Kit 2004-2007

Full Gasket Kit To Fit The Honda CRF250R 2004-2007 Four Stroke Engine

Quality full gasket sets all the gaskets your require to strip and rebuild your engine is in this kit.


Price: 45.89 (55.07 Including VAT at 20%)



Quantity:  






Honda CRF250R Crank Shaft Main Bearings

Honda CRF250R Crank Shaft Main Bearings

Pair Of Crankshaft Main Bearings For The Honda CR250F 2004-2008

Made In Japan
Price: 57.40 (68.88 Including VAT at 20%)



Quantity:  






Honda CRF250R Con Rod Kit Mitaka 2004-2006

Honda CRF250R Con Rod Kit Mitaka 2004-2006

Mitaka Con Rod Kit To Fit Honda CRF250R 2004-2006

Kit contains con-rod, crank pin, big end cage, big end rollers.

Made in Taiwan


Price: 59.50 (71.40 Including VAT at 20%)



Quantity:  






Honda CRF250R Prox Con Rod Kit 2004-2011

Honda CRF250R Prox Con Rod Kit 2004-2011

Prox Con Rod Kit To Fit The Honda CRF250 2004-2011

Kit contains con-rod, crank pin, big end cage, big end rollers, 2 thrust washers and small end bearing.

Prox Part # 03.1334
Price: 127.50 (153.00 Including VAT at 20%)



Quantity:  






Honda CRF 250R Flywheel Puller 2004-2009

Honda CRF 250R Flywheel Puller 2004-2009

Flywheel Puller To Fit The Honda CRF 250 04-09

Essential Tool For Removing The Fly Wheel Generator Alternator On The Honda CRF 250R CRF 250X 2004-2009 And Honda CRF 250X 2004-2012

Please Check That You Have A M24x1.50 External RH Thread On Your Flywheel As This Puller Has a M24x1.5 RH Internal Thread.

Replaces Honda OEM tool 07AMC-MEBA100


This Part Will Also Fit The Following Model Bikes.

Honda CRF150R 2007 - 2013 CRF150RB EXPERT 2007 - 2013 CRF250X 2004 - 2012 CRF250R 2004 - 2009 CRF450R 2002 - 2008 Replaces Honda OEM tool 07AMC-MEBA100

Kawasaki KX250F 2004 - 2010, KX450F 2006-2008 Replacement for Kawasaki OEM tool 57001-1565

Suzuki RM-Z250 2004-2009 RM-Z450 2005 -2007 RM-Z450Z 2005 - 2007 Replacement for Suzuki OEM tool K5700-11565-LPT

Yamaha YZ450F 2006 - 2008

Sorry There Are No Spare Parts For This Item.

Flywheel Pullers are essential for safely removing the flywheel / ignition. Most pullers are simple tools, usually consisting of an outer body that attaches to the flywheel and a lead screw to push on the crankshaft. Some pullers are just a hardened bolt that threads into the flywheel. Virtually every flywheel or rotor is attached to the crankshaft by a taper on the crank, it is this taper that holds the flywheel on ,the woodruff key is only there to align the flywheel on the crank for timing purposes and in no way should "drive" the flywheel. The torque from the fixing bolt or nut holds the flywheel securely on the taper of the crankshaft and it is this bond you need to break


Price: 17.38 (20.86 Including VAT at 20%)



Quantity:  








PJ Motorcycle Engineers - Specialists in 2 Stroke Engines


Aprilia RS125 Carb Main Jet Dellorto 6mm
Aprilia RS125 Carb Main Jet Dellorto 6mm

4.68
5.62
find out more

Aprilia RS125 Moto RRT Oil Filler Plug Alloy Type
Aprilia RS125 Moto RRT Oil Filler Plug Alloy Type

5.99
7.19
find out more

Aprilia RS125 Bore Kit Rotax 122 Cylinder Kit
Aprilia RS125 Bore Kit Rotax 122 Cylinder Kit

169.36
203.23
find out more


PJME Home
About Us
Contact Us
Links Page
News
General Shipping & Returns Information
Privacy Policy
Online Security
Cagiva 125
Yamaha RD350 LC
Yamaha RD350 YPVS
Cylinder Re-Sleeving
Cylinder Re-Coating
Cylinder Re-Boring
Crankshaft Rebuilding
Engine Rebuilding
Cylinder Packing
Engine Packing
Aprilia RS125
Home | About Us | Shipping & Returns | Terms & Conditions | Contact Us | Site Map | Search | Links & Resources

© Copyright PJME 2008-2013

Actinic Web Design maintained by Hanson Web Design