PJME - Motorcycle Engineers , 2 stroke engine specialist aprilia cagiva
homeAbout UsShipping & ReturnsContact UsNewsForumlogin twitterfacebook
You Are Here: Online Parts Store > Road Bike Parts > Aprilia Parts > Aprilia RS125 > Aprilia RS125 Engine Top End
online store

Cylinder Re-Sleeving
Cylinder Re-Coating
Cylinder Re-Boring
Crankshaft Rebuilding
Thread Repairs
Engine Rebuilding
Job Packing

Motul Motocool Expert Engine Coolant
Motul Motocool Expert Engine Coolant
5.82
6.98
find out more

Aprilia RS125 Under Seat Tail Tidy With Built In LED Lights 99-05
Aprilia RS125 Under Seat Tail Tidy With Built In LED Lights 99-05
70.83
85.00
find out more

Aprilia RS125 Italkit 34mm Inlet Manifold
Aprilia RS125 Italkit 34mm Inlet Manifold
29.99
35.99
find out more

Yamaha RD250LC Full Gasket Kit Athena
Yamaha RD250LC Full Gasket Kit Athena
19.50
23.40
find out more

Aprilia RS4-125 Athena Top End Gasket Set 2011-2014
Aprilia RS4-125 Athena Top End Gasket Set 2011-2014
46.99
56.39
find out more

Honda CR125 Athena Full Gasket Set 2000-2002
Honda CR125 Athena Full Gasket Set 2000-2002
33.98
40.78
find out more

Honda CR125 Clutch Cover Gasket 1990-2004
Honda CR125 Clutch Cover Gasket 1990-2004
4.66
5.59
find out more

 

Aprilia RS125 Engine Top End



Aprilia RS125 Top End Rebuild Kit Mitaka

Aprilia RS125 Top End Rebuild Kit Mitaka

Top End Rebuild Kit To Fit The Aprilia RS 125 1997-2012 Rotax 122

What you Get in the kit

Mitaka 2 Ring Piston kit, piston rings, gudgeon pin & 2 circlips,Top End Gasket Set, Small End Bearing

Please Choose Piston Size
53.96mm
53.97mm
53.98mm
53.99mm
54.00mm
   


Price: 50.43 (60.52 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. Aprilia RS125 Bottom End Rebuild Kit
2. Aprilia RS125 Stepped Woodruff Key
3. Aprilia 125 EBC Dirt Racer Clutch Kit



Customer Reviews

  great piston   well worth its money cant go wrong if ur looking for a budget piston kit you,ve found one....   (04/06/2013) steve marsh - swansea


  Very good product  I bought this to rebuild my bike. Its good qality and reasonably priced   (29/03/2013) -



Aprilia RS125 Cylinder Base Nuts

Aprilia RS125 Cylinder Base Nuts

Set Of 4 Cylinder Base Nuts For The Aprilia RS 125 All years.

These Are The Correct Nuts For Holding Down The Cylinder On The RS125.

Price Is For A Set Of 4

They Are A Flange Nut With A 11mm Hex Just Like The Original Aprilia Part.

Aprilia Have Now Discontinued Them And Now Send You A Normal M8 Nut With A 13mm Hex, Which Is Near Impossible To Fit A Spanner On Them.


Price: 12.50 (15.00 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. Aprilia RS125 Cylinder Stud Short AP0241381
2. Aprilia RS125 Crankshaft Main Bearing And Oil Seal kit Top Quality
3. 11mm and 13mm Half Moon Draper Spanner



11mm Chrome plated  Draper Spanner

11mm Chrome plated Draper Spanner

Draper Expert HI-TORQ Spanner 11mm

Not a standard size spanner found in common spanner sets but is an essential size if trying to remove your Aprilia RS 125 cylinder.


Price: 4.99 (5.99 Including VAT at 20%)


Quantity:  






11mm and 13mm Half Moon Draper Spanner

11mm and 13mm Half Moon Draper Spanner

Draper Expert Combination Spanner 11mm one side and 13mm on the other.

Half moon shape to reach into areas with little or no room for conventional spanners.

Must have tool for anybody with an RS125 says our in house Aprilia specialist Luke "if you are going to take your cylinder base nuts off with the engine still in the bike there is no tool better suited."


Price: 4.99 (5.99 Including VAT at 20%)


Quantity:  




People who bought this item also bought:
1. NGK Spark Plug BR9EG
2. Aprilia RS125 Carb Main Jet Dellorto 6mm
3. Aprilia RS125 Crankshaft Main Bearing And Oil Seal kit Top Quality



Aprilia RS125 Bore Kit Rotax 122 Cylinder Kit

Aprilia RS125 Bore Kit Rotax 122 Cylinder Kit

This is a cylinder kit for the Aprilia RS 125 Rotax 122 Type from 1997- 2012

The kit comes with Nickasil plated bore, Piston, Piston Rings, G-pin, C-clips, Small End Bearing, 3 Base Gaskets, Cylinder Head O rings, Power Valve Gaskets and Power Valve Seal.

Mitaka Cylinders Are Made in Taiwan and are a Direct Copy of the Original Cylinder


Upgrade Your Piston Kit, We Can Replace the Mitaka Piston Kit For One Of The High Performance Equivalents.

Type

Vertex +34.50
Wossner +52.50
Wiseco +75.00
None I Will Use Mitaka +0.00

   


Upgrade Your Gasket Kit

Type

Athena Top Qualty (+4.85)
None I Will Use Mitaka (+0.00)
  

   


Price: 169.36 (203.23 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. Aprilia RS125 Carb Main Jet Dellorto 6mm
2. Aprilia RS125 RAVE 2 Power Valve Bellows
3. Aprilia RS125 Crankshaft Oil Seals



Customer Reviews

  Very good parts and service  Parts received as ordered. All parts installed, form, fit and function ok. The bike been put together and odo collected over 1500km in three weeks. Runs great. I can recommend your service. Ordering was easy and worked like clockwork and feedback request, as a customer you don't see this too often   (14/07/2014) Matti - Finland


  Very good quality for good price  Ordered this on other parts to finland received them in 5 days, bike running up on next day. Simply best quality and cheap   (15/11/2012) Virtanen Jimmy - Finland


  cylinder kit   Had two bikes in bits, ordered two kits,recieved them in 2 days, bikes running next day.Brilliant service and exerlent parts. Many thanks Tony.   (03/10/2012) a r collins - Bournemouth



Aprilia RS125 Bore Kit Rotax 123 Cylinder Kit

Aprilia RS125 Bore Kit Rotax 123 Cylinder Kit

This is a cylinder bore kit for the Aprilia RS 125 Rotax 123 Type 1988-1996

The kit comes with Nickasil plated bore, Piston, Piston Rings, G-pin, C-clips, Small End Bearing, 3 Base Gaskets, Cylinder Head O rings, Power Valve Gaskets and Power Valve Seal.

Mitaka Cylinders Are Made in Taiwan and are a Direct Copy of the Original Cylinder


Upgrade Your Piston Kit, We Can Replace the Mitaka Piston Kit For One Of The High Performance Equivalents.

Type

Wossner (+52.50)
Wiseco (+75.00)
Vertex (+29.00)
None I Will Use Mitaka (+0.00)

   


Upgrade Your Gasket Kit

Type

Athena Top Qualty (+4.85)
None I Will Use Mitaka (+0.00)
  

   


Price: 169.36 (203.23 Including VAT at 20%)



Quantity:  






Customer Reviews

  very good kit  i brought thid for my sons bike that had seized on the piston ring. a very nice kit and went on the bike with no problems. bike running well now. very good value for money and a very quick service.   (29/03/2013) barry davies - isle of wight



Aprilia RS125 ITALKIT 140cc Big Bore Kit 122

Aprilia RS125 ITALKIT 140cc Big Bore Kit 122

This Kit Will Only Fit The Rotax 122 Type Engine As Fitted To The Aprilia RS 125 122 1996-2012

Produced By The Original Maker Of The Aprilia Cylinder "Gilardoni" This 140cc Big Bore Kit Comes With A Forged And Balanced Single Ring Vertex Piston Kit, Cylinder Bored To 57mm (140cc) Gaskets And A Power Valve Spacer.

We feel the Italkit Aprilia RS 125 big bore kit is the best big bore kit on the market for the Aprilia RS125, unlike the Polini 154kit the Italkit one likes to rev like a 125 but still gives you more power all though the rev range

You Will Need To Use Your Existing Cylinder Head With This Kit, You Can Use The Std Dome VHM Head But Not The Flat Top VHM Head!

Please Note: Italkit offer no warranty with these parts as they are designed and manufactured for "competition use only" the entire risk as to the quality and performance is with the buyer.

kit uses the std size small end bearing (not incuded)

Unfortunately the Italkit big bore kits for the Aprilia RS125 will be out of stock for 2-3 months.
Price: 297.00 (356.40 Including VAT at 20%)



Quantity:  




Sorry Out Of Stock



Customer Reviews

  140 bore kit for 122   Great kit does what it says on the tin very happy   (07/11/2012) Gavin - essex


  so far so good   Fitted well and so far so good . Good after market part   (28/10/2012) gavin - essex



Aprilia RS125 ITALKIT 140cc Big Bore Kit 123

Aprilia RS125 ITALKIT 140cc Big Bore Kit 123

This Kit Will Only Fit The Rotax 123 AF1Type Engine As Fitted To The Aprilia RS125 123 1995-1996 Aprilia AF1 125 1988-1994.

Produced By The Original Maker Of The Aprilia Cylinder "Gilardoni" This 140cc Big Bore Kit Comes With A Forged And Balanced Single Ring Vertex Piston Kit, Cylinder Bored To 57mm (140cc) Gaskets And A Power Valve Spacer.

We feel the Italkit Aprilia RS 125 big bore kit is the best big bore kit on the market for the Aprilia RS125, unlike the Polini 154 kit the Italkit one likes to rev like a 125 but still gives you more power all though the rev range

You Will Need To Use Your Existing Cylinder Head With This Kit, You Can Use The Std Dome VHM Head But Not The Flat Top VHM Head!

Please Note: Italkit offer no warranty with these parts as they are designed and manufactured for "competition use only" the entire risk as to the quality and performance is with the buyer.

kit uses the std size small end bearing (not incuded)
Price: 297.00 (356.40 Including VAT at 20%)



Quantity:  






Aprilia RS125 Polini Big Bore Kit 154cc

Aprilia RS125 Polini Big Bore Kit 154cc

Polini Big Bore Kit To Fit Both RS 125 Engines ( Rotax 122&123 Type) 1995-2012

The kit is supplied with Cylinder 60mm, piston, piston rings, G-pin, C-clips, Cylinder head, Gaskets, Bolts/ washers and fitting Instructions.

You will need to Re Jet Your Carburettor and you would be best fitting a 34mm carburettor to get the best out of this kit.

YOU SHOULD ALSO KNOW THAT POLINI OFFER NO WARRANTY WITH THERE PARTS AS THEY ARE FOR "COMPETITION" USE ONLY" SO PLEASE BEAR THIS IN MIND WHEN MAKING YOUR PURCHASE

Note kit uses the std size small end bearing (not incuded)


Price: 394.78 (473.74 Including VAT at 20%)



Quantity:  




Sorry Out Of Stock

People who bought this item also bought:
1. Aprilia RS125 Carb Main Jet Dellorto 6mm
2. Aprilia RS125 Bar End Weights
3. Aprilia RS125 Power Valve Housing Bolts



Aprilia RS125 Mitaka Cylinder Rotax 122

Aprilia RS125 Mitaka Cylinder Rotax 122

Aprilia RS 125 Cylinder To Fit The Rotax 122 Type Engine,

This Is A Mitaka Aprilia RS 125 Barrel On Its Own Ideal If You Just Need The Cylinder On Its Own.

Note The Cylinder Has Been Finished To Fit A 53.96- 53.97 Piston, We Advise The Customer Check There Piston To Bore Clearance Before Installing.


Price: 125.00 (150.00 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. 11mm and 13mm Half Moon Draper Spanner
2. Aprilia Power Valve Blade Moto RRT
3. Aprilia Rotax 122 Clutch Cover Gasket 122



Aprilia RS125 Genuine Cylinder

Aprilia RS125 Genuine Cylinder

Genuine Cylinder From Aprillia For The RS 125 122 Type Engine

Please note this is just the bare cylinder from aprilia it does not include anything

Piston,Rings,gaskets, etc all sold separately .

Aprilia Part Number AP0223614


Price: 686.47 (823.76 Including VAT at 20%)


Quantity:  






Aprilia RS125 Piston Assembly Genuine Aprilia Parts

Aprilia RS125 Piston Assembly Genuine Aprilia Parts

This Is A Genuine Aprilia Piston Assembly To Fit The Aprilia RS 125 All Years.

Note This Does Not Come With A Piston Pin Aprilia Sell This As A Separate Item!


Choose Piston Size

Please Choose Piston Size
   




Quantity:  






Aprilia RS125 Piston Pin Genuine Aprilia

Aprilia RS125 Piston Pin Genuine Aprilia

This Is A Genuine Aprilia RS 125 Piston Pin Or Gudgeon Pin

Aprilia Part Number AP0216139
Price: 24.00 (28.80 Including VAT at 20%)


Quantity:  






Aprilia RS125 Mitaka Piston Kit

Aprilia RS125 Mitaka Piston Kit

Mitaka Piston kit to fit a Aprilia RS 125 / AF1 ROTAX 122 & 123 type Engines

This is a Mitaka Piston kit STD type 2 rings, made in Taiwan but of very good quality.

Piston kit contains piston, piston rings, gudgeon pin and 2 circlips.

Please Note Our Kit comes with the "Riken" Piston Rings & Not The Cheap Piston Rings Some Other Sellers Are Offering

The piston has a coated piston skirt for lower friction,this piston is suitable for road or race use.



Please Choose Piston Size
53.96mm
53.97mm
53.98mm
53.99mm
54.00mm
   


Ring Upgrade

Ring Upgrade choices


Ring Upgrade choices: Standard Rings Standard Rings (+0.00)

Ring Upgrade choices: Moto RRT Titanium Coated Moto RRT Titanium Coated (+7.14)
  

   


Price: 34.03 (40.84 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. Aprilia RS125 Water Pump Gear
2. Fuel Pipe 6.5mm Bore Purple
3. Aprilia RS125 Oil Pump Drive Gear



Customer Reviews

  Excellent product  I've used these pistons for a while and run everything full power and max compression and have never had an issue.   (12/07/2014) Mick - Lincoln


  Piston kit  Can't believe the quality of these piston I fitted one to my 09 model and had a zeeltronic fitted and loads of other mods and 2000 miles lates it's still same compression I would recommend this piston for the aprilia rs 125   (04/07/2014) Paul - Hull


  Great product  These Mitaka pistons get a lot of bad feedback, however this isn't due to the piston being sub-standard but down to the fact that the piston rings they used to supply with it were inferior rubbish.. Well done to PJME for supplying RIK rings with them now. No problems using this kit 1000+ miles later   (01/04/2013) Lewis - Warwick



Aprilia RS125 Oversize Mitaka Piston Kit

Aprilia RS125 Oversize Mitaka Piston Kit

This is an oversize piston kit for the Aprilia RS 125, Fits Both 123 and 122 Type Engines.

This piston is to be used in a cylinder fitted with a cast iron sleeve or sometimes called a "steel liner"

Note you cannot just rebore a STD plated cylinder and use this piston! It must run in a cast-iron bore.


   


Price: 35.00 (42.00 Including VAT at 20%)



Quantity:  






Aprilia RS125 Wiseco Piston

Aprilia RS125 Wiseco Piston

Wiseco Piston kit to fit a Aprilia RS 125 / AF1 ROTAX 122 & 123 type Engines

This is a Wiseco Piston kit made in The USA, The Piston is Forged For Better Strength.

Piston kit contains piston, piston rings, gudgeon pin and 2 circlips.

This Piston Is Suitable For Road And Racing Use

Choose Grade
Piston Size 53.95
   


Price: 104.00 (124.80 Including VAT at 20%)



Quantity:  






Aprilia RS125 Vertex Piston kit Twin Ring Std Type

Aprilia RS125 Vertex Piston kit Twin Ring Std Type

Vetex Piston Kit For The Aprilia RS 125 1988-2012 Both Rotax 122 And 123 Type Motors

This Piston Is A Direct Replacment For The Std Item With 2 Piston Rings

Piston kit contains piston, piston rings, gudgeon pin and 2 circlips.

Vertex Pistons Are Made In Italy With A Molybdenum Coating,

Vertex Part Number 22003

Replaces Aprilia Part Number AP0294744, AP0294747, AP0294748, AP0294745, AP0294755, AP0294753

Please Choose Piston Size
53.97mm Vertex A Grade
53.98mm Vertex B Grade
54.00mm Vertex D Grade
54.01mm Vertex EGrade
   


Price: 65.50 (78.60 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. Aprilia RS125 Aluminium Mirror Bolt Kit
2. NGK Spark Plug Cap Racing
3. Aprilia RS125 Front Sprocket Circlip



Aprilia RS125 Wossner Piston Kit Std Twin Ring

Aprilia RS125 Wossner Piston Kit Std Twin Ring

Replacement Wossner Piston To Fit The Aprilia RS 125 Fits All Years And Both 122 and 123 Rotax Engine.

Wössner pistons are manufactured from a high yield 4032 alloy which has low expansion under temperature. This allows closer piston to bore clearances reducing piston noise. Wössner pistons also feature a unique graphite based coating on the skirts which aids the bedding in procedure.

Please Choose Piston Size
53.96mm Wossner B Grade
53.97mm Wossner C Grade
53.98mm Wossner D Grade
53.99mm Wossner E Grade
   


Price: 84.00 (100.80 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. Aprilia RS125 Top End Gasket Kit Rotax 122 Budget



Customer Reviews

  Extremely good Piston  It works like a charm better Original Piston. Highly recommended.   (15/08/2014) rudy joseph - Singapore


  TOP QUALITY    (11/07/2014) -


  Good piston  Replaced piston good fit runs well beds in quickly as we'll will be using again in spare engine rebuild. Fast delivery   (20/05/2014) Tim - London



Aprilia RS125 Vertex Race Piston Kit Single Ring

Aprilia RS125 Vertex Race Piston Kit Single Ring

Vetex Piston Kit For The Aprilia RS 125

Race Piston Single Ring

This Piston Is A Direct Replacment For The Std Item With 1 Piston Ring, Really Only For Race Use !

Vertex Pistons Are Made In Italy With A Molybdenum Coating,

extending the coating.

Please Choose Piston Size
53.97mm Vertex A Grade
53.98mm Vertex B Grade
   


Price: 64.99 (77.99 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. Aprilia RS125 Carb Main Jet Dellorto 6mm
2. Aprilia RS125 Samco Silicone Hose Kit
3. Aprilia RS125 Italkit 34mm Inlet Manifold



Aprilia RS125 Mitaka Piston Single Ring

Aprilia RS125 Mitaka Piston Single Ring

Mitaka Single Ring Mitaka Piston For The Aprilia RS 125 Fits All Years And Both Rotax 122 + 123

It Comes With A Coated Skirt For Lower Friction

Available in a choice of grades

Please Note This Piston Has The Ring Peg In The Centre Of The Piston As Shown In The Image Below. This Means That The End Of The Piston Rings Run Across The Inlet Port, This Is Perfectly Normal Practice, KTM, TM And Honda RS125 Race Bike All Have A Centre Pegged Piston Running Over A Open Port.

Please Choose Piston Size
53.96mm
53.98mm
53.99mm
   


Price: 42.50 (51.00 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. Aprilia RS125 Base Gasket Rotax 122 Type
2. Aprilia Power Valve Blade Moto RRT
3. Aprilia RS125 Top End Gasket Kit Rotax 122 Athena



Customer Reviews

  great quality product !  Saved our race weekend !   (12/08/2013) cliff - Dublin



Aprilia RS125 Vertex Flat Top Piston Twin Ring

Aprilia RS125 Vertex Flat Top Piston Twin Ring

Vertex Aprilia RS 125 Flat Top Piston With 2 Rings

ONLY FOR USE WITH A MODIFIED CYLINDER HEAD OR THE VHM FLAT HEAD

Only available in 53.97mm

Please Note This Piston Has The Ring Peg In The Centre Of The Piston As Shown In The Image Below. This Means That The End Of The Piston Rings Run Across The Inlet Port, This Is Perfectly Normal Practice, KTM, TM And Honda RS125 Race Bike All Have A Centre Pegged Piston Running Over A Open Port.


Price: 67.50 (81.00 Including VAT at 20%)



Quantity:  






Aprilia RS125 Flat Top Piston Twin Ring Wossner

Aprilia RS125 Flat Top Piston Twin Ring Wossner

Wossner Aprilia RS 125 Flat Top Piston With 2 Rings

ONLY FOR USE WITH A MODIFIED CYLINDER HEAD OR THE VHM FLAT HEAD

Please Note This Piston Has The Ring Pegs In The Centre Of The Piston As Shown In The Image Below. This Means That The End Of The Piston Rings Run Across The Inlet Port, This Is Perfectly Normal Practice, KTM, TM And Honda RS125 Race Bike All Have A Centre Pegged Piston Running Over A Open Port.

Please Choose Piston Size
53.97mm Wossner C Grade
53.98mm Wossner D Grade
   


Price: 84.00 (100.80 Including VAT at 20%)


Quantity:  






Aprilia RS125 Vertex Race Flat Top Piston Single Ring

Aprilia RS125 Vertex Race Flat Top Piston Single Ring

Vetex Piston Kit For The Aprilia RS 125 This Is A Flat Top Single Ring Piston Kit.

ONLY FOR USE WITH A VHM FLAT TOP CYLINDER HEAD!

Vertex Pistons Are Made In Italy With A Molybdenum Coating,extending the coating.

Piston Size Is 53.97mm This Is The Only Size This Piston Comes In

Please Note This Piston Has The Ring Peg In The Centre Of The Piston As Shown In The Image Below. This Means That The End Of The Piston Rings Run Across The Inlet Port, This Is Perfectly Normal Practice, KTM, TM And Honda RS125 Race Bike All Have A Centre Pegged Piston Running Over A Open Port.


Price: 64.99 (77.99 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. Aprilia RS125 VHM Racing Cylinder Head Flat Flat Top Piston Only
2. Aprilia RS125 Base Gasket Rotax 122 Type
3. Aprilia RS125 Piston Ring For Single Ring Pistons




Related products:

Aprilia RS125 VHM Racing Cylinder Head Flat Flat Top Piston Only

Aprilia RS125 VHM Racing Cylinder Head Flat Flat Top Piston Only

76.00

91.20

Aprilia RS 125 VHM Cylinder Head For Use With The A Flat Top Piston Only.

Fits Both Rotax 122 And 123 Type Engines, All Years Of The Aprilia RS 125

Art Number: AE32008-010

Piston Height -1.00mm

Volume 11.70 cc

Squish 1.00mm

The Cylinder Head Is Made From Billet Alloy.
find out more


Aprilia RS125 Wiseco Flat Top Single Ring Piston Kit

Aprilia RS125 Wiseco Flat Top Single Ring Piston Kit

Wiseco Piston Kit For The Aprilia RS 125 This Is A Flat Top Single Ring Piston Kit.

A Forged Performance Piston From Wiseco

ONLY FOR USE WITH A MODIFIED OR VHM FLAT TOP CYLINDER HEAD!

Piston Size Is 53.95mm This Is The Only Size This Piston Comes In

Please Note This Piston Has The Ring Peg In The Centre Of The Piston As Shown In The Image Below. This Means That The End Of The Piston Rings Run Across The Inlet Port, This Is Perfectly Normal Practice, KTM, TM And Honda RS125 Race Bike All Have A Centre Pegged Piston Running Over A Open Port.


Price: 74.00 (88.80 Including VAT at 20%)



Quantity:  






Aprilia RS125 Piston Rings For Genuine Aprilia Piston

Aprilia RS125 Piston Rings For Genuine Aprilia Piston

This Is A Set Of 2 Pistons Rings For A Genuine RS125 Aprilia Piston.

NOTE THESE WILL ONLY FIT THE STD GENUINE APRILIA PISTON

Replaces Aprilia Part Number AP0215670


Price: 18.50 (22.20 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. Aprilia RS125 Steering Head Set Bearing Kit



Aprilia RS125 Titanium Coated Piston Rings Moto RRT

Aprilia RS125 Titanium Coated Piston Rings Moto RRT

Moto RRT Titanium Coated Piston Rings To Fit The RS 125 Piston, Std Type Dome Top Twin Ring

These Rings Fit The Following Pistons Vertex Twin Ring, Wiseco, Prox, Mitaka, Wossner.

THESE RINGS DO NOT FIT THE GENUINE APRILIA PISTON OR THE FLAT TOP 2 RING PISTONS

Click For A Bigger Photo
Price: 25.00 (30.00 Including VAT at 20%)


Quantity:  




People who bought this item also bought:
1. Aprilia RS125 Crankshaft Main Bearing And Oil Seal kit Top Quality
2. Aprilia RS50 Aprilia RS125 Haynes Manual
3. Aprilia Rotax 122 Full Gasket Kit Athena



Aprilia RS125 Piston Ring For Single Ring Pistons

Aprilia RS125 Piston Ring For Single Ring Pistons

Replacement Piston Ring To Fit The Vertex, Mitaka, Wiseco Single Ring Pistons
Price: 8.93 (10.72 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. Aprilia RS125 Base Gasket Rotax 122 Type
2. Aprilia Rotax 122 Small End Bearing Genuin Aprilia Part
3. Aprilia RS125 Cylinder Inner O-Ring "Head Gasket"



Aprilia RS125 Piston Rings For Mitaka,Vertex, Wossner, Wiseco Pistons

Aprilia RS125 Piston Rings For Mitaka,Vertex, Wossner, Wiseco Pistons

This Is A Set Of 2 Piston Rings To Fit The RS 125 Piston, Std Type Dome Top Twin Ring

These Rings Fit The Following Pistons Vertex Twin Ring, Wiseco, Prox, Mitaka, Wossner

THESE RINGS DO NOT FIT THE GENUINE APRILIA PISTON OR THE FLAT TOP 2 RING PISTONS


Price: 17.86 (21.43 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. Aprilia RS125 Small End Bearing
2. 11mm and 13mm Half Moon Draper Spanner
3. Aprilia Rotax 122 Full Gasket Kit Budget



Customer Reviews

    top quality   (29/03/2013) -



Aprilia RS125 Piston Rings For The Flat Top 2 Ring Pistons

Aprilia RS125 Piston Rings For The Flat Top 2 Ring Pistons

Replacement Piston Rings To Fit The Aprilia RS 125 Wossner And The Vertex 2 Ring Flat Top Piston.

These Rings Will Not Fit Any Other Pistons But The Ones Listed

Price Is For 2 Piston Rings


Price: 19.20 (23.04 Including VAT at 20%)



Quantity:  






Aprilia RS125 Small End Bearing

Aprilia RS125 Small End Bearing

Aprilia RS 125 Small End Bearing

This will fit both the Rotax 122 and 123 Motor, Also Fits The Polini Big Bore Piston

Qualty Item Made In Japan, We Have Sold Over 2000 Of These With No Issues
Price: 4.25 (5.10 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. Aprilia RS125 Base Gasket Rotax 122 Type
2. Aprilia RS125 Main Bearings Top Quality Koyo
3. Aprilia RS125 Top End Gasket Kit Rotax 122 Athena



Aprilia RS125 Small End Bearing Genuine Aprilia Part

Aprilia RS125 Small End Bearing Genuine Aprilia Part

This Is A Genuine Aprilia RS 125 Small End Bearing.

Aprilia Part Number AP0932028


Price: 14.34 (17.21 Including VAT at 20%)


Quantity:  




People who bought this item also bought:
1. Aprilia RS125 Base Gasket Rotax 122 Type
2. Aprilia RS125 Top End Gasket Kit Rotax 122 Athena
3. Aprilia RS125 Piston Ring For Single Ring Pistons



Customer Reviews

  Best quality  Simply the best quality =)   (15/11/2012) Virtanen - Finland



Aprilia RS125 Top End Gasket Kit Rotax 122 Athena

Aprilia RS125 Top End Gasket Kit Rotax 122 Athena

Top End Gasket Kit For The Aprilia RS125 Rotax 122 Type 1997-2012

This Kit Is Made In Italy By Athena And Is A Better Quality One Than The Budget One We Sell Which Is Made In Taiwan. "Why is it better i hear you say" Well the gaskets are made from the same material & in the same factory as the original aprilia ones, the gasket material is better than the Taiwanese one and fits much nicer.


Price: 17.01 (20.41 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. Aprilia RS125 Base Gasket Rotax 122 Type
2. Aprilia Rotax 122 Small End Bearing Genuin Aprilia Part
3. Aprilia RS125 Piston Ring For Single Ring Pistons



Customer Reviews

  Quality kit at a good price!  Second time now I've bought this kit, though the first time round was for a Mito. As usual with PJ though no problems whatsoever with the product and a top notch service.   (01/04/2013) Lewis - Warwick



Aprilia RS125 Top End Gasket Kit Rotax 122 Budget

Aprilia RS125 Top End Gasket Kit Rotax 122 Budget

Aprilia RS125 Top end gasket kit for Rotax 122 type engines, From 1997-2012

Kit contains 3 base gaskets, Inner and outer O-rings for the cylinder head, Reed gasket, power valve gasket, and exhaust gasket.

Made In Taiwan
Price: 12.75 (15.30 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. Heavy Duty RK Racing Chain Split Link
2. Rear Paddock Stand Standard Steel Type
3. Aprilia RS125 Renthal Front Sprocket



Aprilia RS125 Top End Gasket Kit Rotax 123 Athena

Aprilia RS125 Top End Gasket Kit Rotax 123 Athena

Aprilia RS125 Top end gasket kit for Rotax 123 type engines, From 1988-1996

This Kit Is Made In Italy By Athena And Is A Better Quality One Than The Budget One We Sell Which Is Made In Taiwan. "Why is it better i hear you say" Well the gaskets are made from the same material & in the same factory as the original aprilia ones, the gasket material is better than the Taiwanese one and fits much nicer.


Price: 17.01 (20.41 Including VAT at 20%)



Quantity:  






Aprilia RS125 Top End Gasket Kit Rotax 123 Budget

Aprilia RS125 Top End Gasket Kit Rotax 123 Budget

Aprilia RS125 Top end gasket kit for Rotax 123 type engines, From 1988-1996

Kit contains 3 base gaskets, Inner and outer O-rings for the cylinder head, Reed gasket, power valve gasket, and exhaust gasket.

Made In Taiwan
Price: 12.75 (15.30 Including VAT at 20%)



Quantity:  






Aprilia RS125 Base Gasket Rotax 122 Type

Aprilia RS125 Base Gasket Rotax 122 Type

Base Gasket To Fit The Aprilia RS125 1996-2012 Rotax 122 Type Engine.

Replaces Aprilia Part Number AP0650095, AP0650096, AP0650097

Made In Italy By Athena

Choose Base Gasket Thickness
0.30mm Thick Base Gasket
0.50mm Thick Base Gasket
   


Price: 1.89 (2.27 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. Aprilia RS125 Cylinder Inner O-Ring "Head Gasket"
2. Aprilia RS125 Powervalve Gasket
3. Aprilia RS125 Reed Valve Gasket Inlet Manifold Gasket



Customer Reviews

    top quality fitted perfect   (29/03/2013) -



Aprilia RS125 Base Gasket Rotax 123 Type

Aprilia RS125 Base Gasket Rotax 123 Type

Base Gasket To Fit The Aprilia RS125 Aprilia AF1 125, Aprilia Futura 125 Rotax 123 Type Engine.

Replaces Aprilia Part Number AP0650090, AP0650091

Made In Italy By Athena

Choose Base Gasket Thickness
0.30mm Thick Base Gasket
0.50mm Thick Base Gasket
   


Price: 1.89 (2.27 Including VAT at 20%)



Quantity:  






Aprilia RS125 Cylinder Inner O-Ring

Aprilia RS125 Cylinder Inner O-Ring "Head Gasket"

Replacement Inner O-ring To Fit The Aprilia RS125, Fits Both Rotax 122 And 123 Type Engines.

This O-Ring Goes Between The Cylinder And The Cylinder Head Item Number 3

Replaces Aprilia Part Number AP0250160


Price: 3.98 (4.78 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. Aprilia RS125 Base Gasket Rotax 122 Type
2. Aprilia RS125 Powervalve Gasket
3. Aprilia RS125 Cylinder Head Outer O-Ring



Aprilia RS125 Cylinder Head Outer O-Ring

Aprilia RS125 Cylinder Head Outer O-Ring

Replacement Outer O-ring To Fit The Aprilia RS 125, Fits Both Rotax 122 And 123 Type Engines.

This O-Ring Goes Between The Cylinder Head And The Cylinder Head Cover, Item Number 7

Replaces Aprilia Part Number AP0430782
Price: 1.98 (2.38 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. Aprilia RS125 Base Gasket Rotax 122 Type
2. Aprilia RS125 Cylinder Inner O-Ring "Head Gasket"
3. Aprilia RS125 Piston Ring For Single Ring Pistons



Aprilia RS125 Cylinder Head Cover O-Ring

Aprilia RS125 Cylinder Head Cover O-Ring

Replacement Cylinder Head Cover O-Ring To Fit The Aprilia RS 125, Fits Both Rotax 122 And 123 Type Engines.

This O-Ring Goes Between The Cylinder Head Cover And The Cylinder, Item Number 14

Replaces Aprilia Part Number AP0250280
Price: 2.98 (3.58 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. Aprilia RS125 Crank Gear / Sprocket Gear O-RING AP0430460
2. Aprilia RS125 Water Pump O-Ring
3. Aprilia RS125 Cylinder Head Outer O-Ring



Aprilia RS125 Reed Valve Gasket Inlet Manifold Gasket

Aprilia RS125 Reed Valve Gasket Inlet Manifold Gasket

Replacement Reed Valve Gasket- Inlet Manifold Gasket To Fit The Aprilia RS125 All Years Also Fits The Aprilia AF1 125, Aprilia Futura 125, Aprilia RX125, Aprilia MX125, Aprilia SX125.

Replaces Aprilia Part Number AP0250521
Price: 1.45 (1.74 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. Aprilia RS125 Base Gasket Rotax 122 Type
2. Aprilia Rotax 122 Small End Bearing Genuin Aprilia Part
3. Aprilia RS125 Indicator Front LH Rear RH 2006 -2008



Aprilia RS125 Piston Circlips

Aprilia RS125 Piston Circlips

Set Of Replacment Circlips For The Aprilia RS 125 Piston

These Will Fit All Makes Of Piston

PRICE IS FOR A PAIR OF CIRCLIPS
Price: 2.00 (2.40 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. Aprilia RS125 Base Gasket Rotax 122 Type
2. Aprilia RS125 Cylinder Inner O-Ring "Head Gasket"
3. Aprilia Rotax 122 Small End Bearing Genuin Aprilia Part



Aprilia RS125 Polini Replacement Piston Kit

Aprilia RS125 Polini Replacement Piston Kit

This is a Replacement Piston Kit For the Polini Aprilia RS125 Big Bore Kit 60mm Bore 154cc

Piston kit contains piston, piston ring, gudgeon pin and 2 circlips.
Price: 81.20 (97.44 Including VAT at 20%)


Quantity:  




People who bought this item also bought:
1. Aprilia Front Sprocket
2. Aprilia RS125 Polini Replacement Top End Gasket Kit
3. Motul Motocool Expert Engine Coolant



Aprilia RS125 Polini Replacement Piston Rings

Aprilia RS125 Polini Replacement Piston Rings

This Is A Set Of 2 Pistons Rings For The Aprilia RS125 Polini Big Bore Piston. 60.00mm Bore 154cc
Price: 24.00 (28.80 Including VAT at 20%)


Quantity:  




Sorry Out Of Stock



Aprilia RS125 Polini Replacement Top End Gasket Kit

Aprilia RS125 Polini Replacement Top End Gasket Kit

This is a Replacement Top End Gasket Kit For The Aprilia RS 125 Polini 154cc Big Bore

Kit Includes 3 Different Thickness Base Gaskets
Price: 19.50 (23.40 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. Aprilia Front Sprocket
2. Motul Motocool Expert Engine Coolant
3. Aprilia RX-SX125 Rear Sprocket



Aprilia RS125 Italkit Big Bore Replacement Piston Kit

Aprilia RS125 Italkit Big Bore Replacement Piston Kit

This Is A Replacement Piston Kit To Fit The Aprilia RS125 Italkit 140cc Big Bore Cylinder.

Kit Comes With A Forged And Balanced Single Ring Vertex Piston, Piston Ring, G-Pin & 2 C-Clips

Choose Piston Size
56.965 mm
56.975 mm
56.985 mm
   


Price: 74.40 (89.28 Including VAT at 20%)



Quantity:  






Aprilia RS125 Italkit Big Bore Replacement Gasket Kit

Aprilia RS125 Italkit Big Bore Replacement Gasket Kit

This Is A Replacement Top End Gasket Kit To Fit The Aprilia RS125 Italkit 140cc Big Bore Cylinder.

This Gasket Kit Fits Both Rotax 122 And 123 Type Big Bore Kits.
Price: 17.01 (20.41 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. Aprilia RS125 Arrow Replacemnet Fitting Kit



Aprilia RS125 Italkit Big Bore Replacement Piston Ring

Aprilia RS125 Italkit Big Bore Replacement Piston Ring

This Is A Replacement Piston Ring To Fit The Aprilia RS125 Italkit 140cc Big Bore Piston.
Price: 14.49 (17.39 Including VAT at 20%)



Quantity:  






Aprilia RS125 Genuine Power Valve Blade

Aprilia RS125 Genuine Power Valve Blade

Power Valve Blade For The Aprilia RS125, Fits Both Rotax 122 And 123 Type Engine

Genuine Aprilia Part Number AP0253722
Price: 104.44 (125.33 Including VAT at 20%)


Quantity:  






Customer Reviews

Aprilia RS125 Moto RRT Power Valve Housing

Aprilia RS125 Moto RRT Power Valve Housing

Replacement Power Valve Housing To Fit The Aprilia RS125 1992-2013

Moto RRT CNC Part Much Stronger Than The Standard Cast Part

Replaces Aprilia Part Number AP0253465

Number 4 In The Exploded Diagram.


Price: 32.50 (39.00 Including VAT at 20%)


Quantity:  




People who bought this item also bought:
1. Aprilia Power Valve Blade Moto RRT



Aprilia RS125 Powervalve Blade

Aprilia RS125 Powervalve Blade

Power Valve Blade For The Aprilia RS125, Fits Both Rotax 122 And 123 Type Engine

This Is A Cnc Copy Of The Aprilia RS 125 Power Valve, This Is Made In Italy But Does Not Come With A The Hard Coating Like The Moto RRT Or The Genuine Blade.

Replaces Genuine Aprilia Part Number AP0253722


Price: 41.00 (49.20 Including VAT at 20%)


Quantity:  






Aprilia Power Valve Blade Moto RRT

Aprilia Power Valve Blade Moto RRT

Here is a Up rated Exhaust Power Valve To Fit The Aprilia RS 125

It Is Made From High Spec Titanium Coated Aluminium.

The Special Titanium Coating Offers Superb Strength And Has The Added Benefit Of Stopping The Blade Wearing Out.

Made By Moto RRT
Price: 45.00 (54.00 Including VAT at 20%)


Quantity:  




People who bought this item also bought:
1. Aprilia RS125 Power Valve Cable Aftermarket
2. Aprilia RS125 Power Valve Spring
3. Aprilia RS125 Base Gasket Rotax 122 Type



Customer Reviews

    gud   (10/02/2014) -


  amazing!  surprisingly better than any other blade, i had to snap 4 of them to buy this 1! better than original, also cheaper!   (08/11/2013) Raul -



Aprilia RS125 Genuine Power Valve Blade

Aprilia RS125 Genuine Power Valve Blade

Power Valve Blade For The Aprilia RS125, Fits Both Rotax 122 And 123 Type Engine

Genuine Aprilia Part Number AP0253722
Price: 104.44 (125.33 Including VAT at 20%)


Quantity:  






Customer Reviews

Aprilia RS125 Powervalve Gasket

Aprilia RS125 Powervalve Gasket

Replacement gasket for the power valve housing on the Aprilia RS125

Quality made in Italy Item

Replaces Aprilia Part Number AP0250975
Price: 2.33 (2.80 Including VAT at 20%)


Quantity:  




People who bought this item also bought:
1. Aprilia RS125 Base Gasket Rotax 122 Type
2. Aprilia RS125 Cylinder Inner O-Ring "Head Gasket"
3. Aprilia RS125 Clutch Lever 2006-2012



Customer Reviews

  Good gasket  Need this part quite often, so took a few for spares   (05/08/2012) Andrii - Dnipropetrovsk, UA


    Spent ages looking for this gasket! None of the Aprilia dealers had any in stock and all the other motorcycle shops wanted to sell me a gasket set. Ordered 2 and got it them in the post next day, well done PJME   (27/06/2012) -



Aprilia RS125 Power Valve Cable

Aprilia RS125 Power Valve Cable

Power Valve Cable To Fit The Aprilia RS 125 1994-2012

Replaces Aprilia Part Number AP0297746


Price: 15.50 (18.60 Including VAT at 20%)


Quantity:  




People who bought this item also bought:
1. 11mm and 13mm Half Moon Draper Spanner
2. Aprilia Power Valve Blade Moto RRT
3. Aprilia Rotax 122 Clutch Cover Gasket 122



Aprilia RS125 Genuine Cylinder Head

Aprilia RS125 Genuine Cylinder Head

Genuine Aprilia RS125 Cylinder Standard Head For the 122 And 123 Type Engine

Aprilia Part Number AP0223385


Price: 99.75 (119.70 Including VAT at 20%)


Quantity:  






Aprilia RS125 VHM Racing Cylinder Head Flat Flat Top Piston Only

Aprilia RS125 VHM Racing Cylinder Head Flat Flat Top Piston Only

Aprilia RS 125 VHM Cylinder Head For Use With The A Flat Top Piston Only.

Fits Both Rotax 122 And 123 Type Engines, All Years Of The Aprilia RS 125

Art Number: AE32008-010

Piston Height -1.00mm

Volume 11.70 cc

Squish 1.00mm

The Cylinder Head Is Made From Billet Alloy.
Price: 76.00 (91.20 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. Aprilia RS125 Base Gasket Rotax 122 Type
2. Aprilia RS125 Piston Ring For Single Ring Pistons
3. Aprilia RS125 Power Valve Cable Aftermarket



Aprilia RS125 VHM Racing Cylinder Head For Use With A Std Dome Piston

Aprilia RS125 VHM Racing Cylinder Head For Use With A Std Dome Piston

This is a VHM Cylinder Head For Use With The Std Dome Piston.

Fits Both Rotax 122 And 123 Type Engines, All Years Of The Aprilia RS 125

Gives Better Heat Transfer Than The STD Aprilia Cyl Head.

The Cylinder Head Is Made From Billet Alloy.
Price: 76.00 (91.20 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. Aprilia RS125 V-Force 3 Reed Valve System
2. V-FORCE-3 Replacement Reeds
3. Aprilia RS125 Crankshaft Main Bearing And Oil Seal kit Top Quality



Customer Reviews

  Best Upgrade I ever had over Std Dome  It works very well and increased compression from 130 stock to 150. The Amount of power increased tremendously. I could feel the difference totally. Must have for this if you're riding RS125.   (15/08/2014) Rudy Joseph - Singapore



Aprilia RS125 Cylinder Head Bolts Set 122 Type

Aprilia RS125 Cylinder Head Bolts Set 122 Type

Replacement Cylinder Head Bolts For To Fit The Aprilia RS125 122 Type Motor


Price: 3.50 (4.20 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. Exhaust Spring Puller Buzzetti Quality Type
2. Arrow Exhaust Springs Short (62.00mm)
3. Aprilia RS125 Small End Bearing



Aprilia RS125 Cylinder Head Bolt Set 123 Type

Aprilia RS125 Cylinder Head Bolt Set 123 Type

Replacement Cylinder Head Bolts For To Fit The Aprilia RS125 123 AF1 Type Motor


Price: 4.45 (5.34 Including VAT at 20%)



Quantity:  






Aprilia RS125 Water Temp Sender

Aprilia RS125 Water Temp Sender

Aprilia RS125 Water Temp Sender, fits both 122 and 123 Type Engines.

Aprilia Part# AP8124487 Thread Size M10 X1.00
Price: 13.43 (16.12 Including VAT at 20%)


Quantity:  




People who bought this item also bought:
1. Aprilia RS125 Front Wheel Bearings 1992-2005



Customer Reviews

  Aprilia RS125 Water Temp Sender  quality item I found it more accurate then the one replaced   (27/02/2013) pego - liverpool



Aprilia RS125 Thermostat

Aprilia RS125 Thermostat

Aprilia RS125 Thermostat, this is number 9 In the Photo

Genuine Aprilia Part AP0222122
Price: 30.12 (36.14 Including VAT at 20%)


Quantity:  






Aprilia RS125 Theromstat Holder

Aprilia RS125 Theromstat Holder

Aprilia RS125 Thermostat Holder, this is number 10 In the Photo

Genuine Aprilia Part AP0222175
Price: 8.44 (10.13 Including VAT at 20%)


Quantity:  






Aprilia RS125 Theromstat Spring

Aprilia RS125 Theromstat Spring

Aprilia RS125 Thermostat Spring, this is number 11 In the Photo

Genuine Aprilia Part AP0239950
Price: 7.24 (8.69 Including VAT at 20%)


Quantity:  






Aprilia RS125 Thermostat Bow Bracket

Aprilia RS125 Thermostat Bow Bracket

Aprilia RS125 Thermostat Bow Bracket, this is number 12 In the Photo

Genuine Aprilia Part AP0222202
Price: 8.57 (10.28 Including VAT at 20%)


Quantity:  






Aprilia RS125 Thermostat Bow Special Cap Screw

Aprilia RS125 Thermostat Bow Special Cap Screw

Aprilia RS125 Thermostat Bow Bracket Special Cap Screw, this is number 13 In the Photo

Genuine Aprilia Part AP0240195

Price is for 1 Screw
Price: 1.12 (1.34 Including VAT at 20%)


Quantity:  






Aprilia RS125 Exhaust Manifold Gasket 122

Aprilia RS125 Exhaust Manifold Gasket 122

Replacement Exhaust Manifold Gasket To Fit The Aprilia RS125.

Fits Between The Cylinder And The Exhaust Manifold, Fits All Years And All Types Of Exhaust Manifolds.

Replaces Aprilia Part Number AP0250271
Price: 2.44 (2.93 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. Aprilia RS125 Evotech Tail Tidy 2009-2012
2. Aprilia RS125 Replacement Arrow Titanium End Can
3. Aprilia RS125 Gear Lever Rubber Pattern Part



Aprilia R125 NGK Racing Spark Plug

Aprilia R125 NGK Racing Spark Plug

NGK Racing Spark Plug BR10EG, This Plug is Fits All Aprilia RS 125 Unrestricted Engines
Price: 6.85 (8.22 Including VAT at 20%)


Quantity:  




People who bought this item also bought:
1. MBTX4U Battery Moto Batt



Aprilia R125 NGK Iridium Spark Plug

Aprilia R125 NGK Iridium Spark Plug

NGK Racing Spark Plug BR10EIX Iridium. This Plug is Fits All Aprilia RS 125 Unrestricted Engines

NGK IRIDIUM Spark Plug Offers,Enhanced Igniton Efficiency, Better Acceleration,Faster Starting & Smother, Running, Longer Life
Price: 12.53 (15.04 Including VAT at 20%)


Quantity:  




People who bought this item also bought:
1. NGK Spark Plug Cap Racing
2. Aprilia Rotax 122 Small End Bearing Genuin Aprilia Part
3. Aprilia RS125 Front Sprocket Circlip



Customer Reviews

    Plug works great. Starts better in cold conditions and runs smoother than standard plug.   (07/04/2013) -



Aprilia RS125 NGK Spark Plug Cap Red

Aprilia RS125 NGK Spark Plug Cap Red

Aprilia RS 125 NGK Spark Plug Cap, Fits All Years.

NGK Spark Plug Cap For Use With Screw On Terminal Post

Suitable For Both 2T And 4T Engines

LD05E Red


Quantity:  






Aprilia RS125 NGK Spark Plug Cap Red No Terminal Post

Aprilia RS125 NGK Spark Plug Cap Red No Terminal Post

Aprilia RS 125 NGK Spark Plug Cap, Fits All Years.

NGK Spark Plug Cap For Use Without Screw On Terminal Post

Suitable For Both 2T And 4T Engines

LB05F Red
Price: 2.50 (3.00 Including VAT at 20%)


Quantity:  






Aprilia RS125 NGK Spark Plug Cap Racing

Aprilia RS125 NGK Spark Plug Cap Racing

Aprilia RS 125 NGK Racing Spark Plug Cap, Fits All Years.

Racing Spark Plug Cap Rubber Sheathed For Added Water Proofing

Red In Colour, For Use With Screw On Terminal Post Only
Price: 4.50 (5.40 Including VAT at 20%)


Quantity:  




People who bought this item also bought:
1. Aprilia RS125 Aluminium Fuel Tank Bolt
2. Aprilia RS125 Aluminium Fuel Tank Cup Washer
3. Aprilia RS125 Front Sprocket Circlip



Customer Reviews

    great cap   (10/07/2014) -



Aprilia RS125 Exhaust Springs

Aprilia RS125 Exhaust Springs

To Fit The Aprilia RS125 Standard Exhaust, Also Fits The Jimlomas, Arrow, Jolly Moto ETC

Price Is For A Pair
Price: 2.60 (3.12 Including VAT at 20%)


Quantity:  




People who bought this item also bought:
1. Aprilia RS125 Fairing Bush Outer Section
2. Aprilia RS125 Choke Cable AP8114331
3. Aprilia RS125 Oil Sight Glass AP0240820



Aprilia RS125 34mm Carburettor Inlet Manifold

Aprilia RS125 34mm Carburettor Inlet Manifold

Inlet Manifold For The Aprilia RS125 Fits All Years

This Manifold Is Required To Fit The Dellorto 34mm Carb To The Aprilia RS125
Price: 32.99 (39.59 Including VAT at 20%)


Quantity:  






Aprilia PJME 144 Replacement Piston Kit

Aprilia PJME 144 Replacement Piston Kit

Piston for use in our Aprilia RS125 144cc big bore kit 58mm bore,

Please note we do not make the 144cc big bore kit anymore.
Price: 95.29 (114.35 Including VAT at 20%)



Quantity:  






Aprilia RS 125 Fuel Filter 7mm

Aprilia RS 125 Fuel Filter 7mm

Aprilia RS 125 Clear Plastic Fuel Filter With A 7mm Outside Diameter Tail
Price: 1.15 (1.38 Including VAT at 20%)


Quantity:  




People who bought this item also bought:
1. Yamaha TZR125 Full Gasket Set
2. Rock Oil Kool Coolant
3. Putoline TT Sport 2 Stroke



Customer Reviews

    high quality   (29/03/2013) -



Aprilia RS 125 Fuel Pipe 6.5mm Bore

Aprilia RS 125 Fuel Pipe 6.5mm Bore

Ariete Fuel Line 6.5mm Bore 11mm Outer Diameter, Colour: Purple

Unleaded fuel resistant inner tube with durable, heat resistant outer. The translucent tube resists shrinking and remains flexible. As used by GP teams.

Supplied in 1m length


Price: 6.75 (8.10 Including VAT at 20%)


Quantity:  




People who bought this item also bought:
1. Aprilia RS125 Aluminium Fuel Tank Bolt
2. Aprilia RS125 Evotech Race Style Exhaust Hanger
3. Aprilia RS125 Balance Shaft Bearings



Customer Reviews

    good quality part   (29/03/2013) -





PJ Motorcycle Engineers - Specialists in 2 Stroke Engines


Aprilia RS125 Carb Main Jet Dellorto 6mm
Aprilia RS125 Carb Main Jet Dellorto 6mm

4.68
5.62
find out more

Aprilia RS125 Aluminium Fuel Tank Cup Washer
Aprilia RS125 Aluminium Fuel Tank Cup Washer

4.50
5.40
find out more

Aprilia RS125 Aluminium Fuel Tank Bolt
Aprilia RS125 Aluminium Fuel Tank Bolt

2.00
2.40
find out more

Aprilia RS125 Italkit 34mm Inlet Manifold
Aprilia RS125 Italkit 34mm Inlet Manifold

29.99
35.99
find out more


PJME Home
About Us
Contact Us
Links Page
News
General Shipping & Returns Information
Privacy Policy
Online Security
Cagiva 125
Yamaha RD350 LC
Yamaha RD350 YPVS
Cylinder Re-Sleeving
Cylinder Re-Coating
Cylinder Re-Boring
Crankshaft Rebuilding
Engine Rebuilding
Cylinder Packing
Engine Packing
Aprilia RS125
Kawasaki Cylinder Re-Sleeving Price List
Honda Cylinder Re-Sleeving Price List
Home | About Us | Shipping & Returns | Terms & Conditions | Contact Us | Site Map | Search | Links & Resources

© Copyright PJME 2008-2013

Actinic Web Design maintained by Hanson Web Design