P J Motorcycle Engineers LTD Performance Parts @ PJ Motorcycle Engineers

	Cylinder Re-Sleeving
	Cylinder Re-Boring
	Crank Shaft Rebuilding
	Thread Repairs
	Job Packing

	Piston Kits
	Con-Rod Kits
	Gasket Sets
	Oil Seal Kits
	Main Bearings
	Clutch Baskets

Actinic Catalog by
ADX Media Web Design

Performance Parts

Online Parts Store > Aprilia Spare Parts And Accessories > Aprilia RS50 RX50 And MX50 Parts > Performance Parts

	RS50 / RX50 Big Bore Kit (Budget Iron) Aprilia RS50 / RX50 Big Bore Kit Made Of Cast Iron Fits 1998-2006 RS / RX 50. This Is The Entry Level Big Bore Kit For The RS50, Will Improve Performance Of The Engine But Does Not Have The Porting Of The Metra Kit Cylinders Kit Contains Piston Kit 47.00mm Small End Bearing,Gaskets Cylinder Head,Cylinder 47mm 70cc THIS KIT WILL NOT FIT THE RS50 WITH THE UNDER SEAT EXHAUST ( THE DERBI ENGINE BIKE) Price: £93.62 (£110.00 Including VAT at 17.5%)
	Quantity:

	RS50 Big Bore Kit Metrakit SP Metrakit SP Serie Big Bore Kit Fits 1998-2006 RS / RX 50. This Is The Best "Road Bike " Big Bore Kit You Can Buy For RS50, Nice Spread Of Power With A Peak RPM Of 13.000. The Cylinder Is Made From Aluminium And Ni + CSi Treated For Better Performance. Kit Contains Piston Kit 47.60mm,Gaskets Cylinder Head,Cylinder 47.60mm 70cc Price: £184.60 (£216.91 Including VAT at 17.5%)
	Quantity:

	RS50 Big Bore Kit Metrakit Pro Race Metrakit Pro Race Cylinder Kit For The Aprilia RS50 / RX50 1998-2006 What Can I Say About This Kit ! It Rocks, I think This Is The Best Big Bore Kit For The RS50, Revs To 15,000 !Say No More. Kit Comes With Everything You Need Cylinder 70cc ,Cylinder Head,Piston Kit ,Gaskets Etc YOU WILL NEED THE METRAKIT "PRO-RACE2 EXHAST TO FIT THIS CYLINDER TO YOUR BIKE IT WILL NOT FIT WITH ANY OTHER EXHAST PIPE ! THIS KIT WILL NOT FIT THE RS50 WITH THE UNDER SEAT EXHAUST ( THE DERBI ENGINE BIKE) Price: £224.98 (£264.35 Including VAT at 17.5%)
	Quantity:

	RS50 / RX50 Crank Shaft ( Racing Type) RS50 / RX50 Replacement Crankshaft, Fits All RS50 And The RX50 With the AM6 Engine 1995-2006 This Crank Come Stuffed Plastic To Increase Crankcase Compression Lightened and balanced, This Crankshaft Is Far Better Than The Standard Item And Will Work Well With A 70cc Or 80cc Big Bore Kit Price: £59.25 (£69.62 Including VAT at 17.5%)
	Quantity:

	RS50 21mm Dellorto Carb Kit This Is A Metrakit 21mm "Big" Carb Kit, For the RS50 1996-2005 Minarelli AM6 Engine Kit Contains Dellorto PHBG 21mm Carb Alloy Inlet Manifold Manual choke (Lever Type) And Cable Operated Choke Jubilee Clip 2 Main Jets 92 And 105 Single Throttle Cable This Is To Be Used If You Want To Bypass The Oil Pump And Run Premix Will Fit Onto The Std Air Box, But Is best With Racing Type Air Filter THIS KIT WILL NOT FIT THE RS50 WITH THE UNDER SEAT EXHAUST ( THE DERBI ENGINE BIKE) Price: £80.46 (£94.54 Including VAT at 17.5%)
	Quantity:

	RS50 / RX50 Race Clutch Kit Race Clutch Kit For The RS50 RX50 Comes With Clutch Plates And Up Rated Springs This Kit Is A Must If You Are Fitting A Big Bore Kit ! Price: £32.89 (£38.65 Including VAT at 17.5%)
	Quantity:

	Carb Main Jet Dellorto 5mm Small Thread Genuine Dellorto Main Jet 5mm Small Thread Price: £4.68 (£5.50 Including VAT at 17.5%)
	Quantity: Select Jet Size

	Carb Main Jet Dellorto 6mm Large Thread Genuine Dellorto Main Jet 6mm Lage Thread Price: £4.68 (£5.50 Including VAT at 17.5%)
	Quantity: Select Jet Size

	RS50 Ramair Filter This is a Ramair Performance Filter, For the RS50 1996-2005 Minarelli AM6 Engine WARNING YOU WILL NEED TO RE-JET YOUR carburettor WHEN FITTING THIS TO YOUR BIKE!! Fits 1996-2005 Price: £21.69 (£25.49 Including VAT at 17.5%)
	Quantity:

	RS50 JOLLY MOTO EXHAUST Jolly Moto Race Pipe To Fit The RS50 1999-2006 Comes With A Carbon Can The Best Exhaust For The RS50 End Of ! RRP £250.00 + vat But I have Reduced The Price To £199.00 + vat Click Here For A Bigger Photo Price: £199.00 (£233.83 Including VAT at 17.5%)
	Quantity:

	RS50 Metrakit RK Race Exhaust Alloy End Can Metrakit RK Replica Race Exhaust To Fit The RS50 1999-2006 Exhaust Pipe Handcrafted And Power Tested To Obtain Maximum Performance. This Has The Alloy Oval End Can And Would Go Very Well With The SP Metrakit Cylinder IMPORTANT FITTING INFO HERE Price: £122.51 (£143.95 Including VAT at 17.5%)
	Quantity:

	RS50 Metrakit RK Race Exhaust Carbon End Can Metrakit RK Replica Race Exhaust To Fit The RS50 1999-2006 Exhaust Pipe Handcrafted And Power Tested To Obtain Maximum Performance. This Has The Carbon Fiber Oval End Can And Would Go Very Well With The SP Metrakit Cylinder IMPORTANT FITTING INFO HERE Price: £135.90 (£159.68 Including VAT at 17.5%)
	Quantity:

	RS50 / RX50 Boyesen Dual Stage Reeds Aprilia RS50 Boysesn Reed Valves This Is A Set Of Boysesn Dual Stage Reed Valve Petels Will Also Fit The MX50 And The RX50 You Will Get Better Throttle Response When You Fit These To Your Bike. Comes With Fitting Instructions And 2 Boyesen Stickers Price: £21.17 (£24.87 Including VAT at 17.5%)
	Quantity:

	RS50 / RS50 Small End Bearing Aprila RS50 / RX 50 Small End Bearing, Made In Japan NOTE ALL THE BIG BORE KITS DONT COME WITH A SMALL END BEARING Price: £4.00 (£4.70 Including VAT at 17.5%)
	Quantity:

	RX50 MX50 Merrakit Thrower Race Exhaust Alloy Can For The Aprilia RX 50 And The MX 50 Upto 2007 AM6 Engine Exhaust Pipe Handcrafted And Power Tested To Obtain Maximum Performance. Comes With Alloy End Can Price: £108.26 (£127.21 Including VAT at 17.5%)
	Quantity:

	RX50 MX50 Merrakit Thrower Race Exhaust Carbon Can For The Aprilia RX 50 And The MX 50 Upto 2007 AM6 Engine Exhaust Pipe Handcrafted And Power Tested To Obtain Maximum Performance. Comes With Carbon End Can IMPORTANT FITTING INFO HERE Price: £118.26 (£138.96 Including VAT at 17.5%)
	Quantity: