P J Motorcycle Engineers LTD Performance Parts @ PJ Motorcycle Engineers

	Cylinder Re-Sleeving
	Cylinder Re-Boring
	Crank Shaft Rebuilding
	Thread Repairs
	Job Packing

	Piston Kits
	Con-Rod Kits
	Gasket Sets
	Oil Seal Kits
	Main Bearings
	Clutch Baskets

Actinic Catalog by
ADX Media Web Design

Performance Parts

Online Parts Store > Aprilia Spare Parts And Accessories > Aprilia RS125 > Performance Parts

	POLINI RS125 Big Bore Kit 154cc AS OF THE 19-03-2008 I HAVE 4 IN STOCK AND WHEN THEY HAVE GONE THEY HAVE GONE ! Polini Big Bore Kit To Fit Both RS125 Engines ( Rotax 122&123 Type) The kit is supplied with Cylinder 60mm, piston, piston rings, G-pin, C-clips, Cylinder head, Gaskets, Bolts/ washers and fitting Instructions. You will need to Re Jet Your Carburettor and you would be best fitting a 34mm carburettor to get the best out of this kit. YOU SHOULD ALSO KNOW THAT POLINI OFFER NO WARRANTY WITH THERE PARTS AS THEY ARE FOR "COMPETITION" USE ONLY" SO PLEASE BEAR THIS IN MIND WHEN MAKING YOUR PURCHASE Price: £355.00 (£417.13 Including VAT at 17.5%)
	Quantity:

	RS125 Vertex Race Piston Kit Single Ring Vetex Piston Kit For The RS125 Race Piston Single Ring This Piston Is A Direct Replacment For The Std Item With 1 Piston Ring, Really Only For Race Use ! Vertex Pistons Are Made In Italy With A Molybdenum Coating, extending the coating. Piston Size is 53.98mm Price: £64.99 (£76.36 Including VAT at 17.5%)
	Quantity:

	RS125 VHM Racing Cylinder Head Flat Top Piston Only This is a VHM Cylinder Head For Ues With The Vertex Flat Top Piston Only The Cylinder Head Is Made From Billet Alloy. Price: £63.82 (£74.99 Including VAT at 17.5%)
	Quantity:

	RS125 Vertex Race Flat Top Piston Single Ring Vetex Piston Kit For The RS125 This Is A Flat Top Single Ring Piston Kit. ONLY FOR USE WITH A MODIFIED CYLINDER HEAD! Vertex Pistons Are Made In Italy With A Molybdenum Coating, extending the coating. Piston Size 53.98mm Price: £67.50 (£79.31 Including VAT at 17.5%)
	Quantity:

	RS125 VHM Racing Cylinder Head For Use With A Std Dome Piston This is a VHM Cylinder Head For Ues With The Std Dome Piston. Gives Better Heat Transfer Than The STD Aprilia Cyl Head. The Cylinder Head Is Made From Billet Alloy. Price: £63.82 (£74.99 Including VAT at 17.5%)
	Quantity:

	RS125 Ramair Filter This is a Ramair Performance Filter to fit the RS125, it will for both 28mm carburettor and the 34mm carburettor. WARNING YOU WILL NEED TO RE-JET YOUR carburettor WHEN FITTING THIS TO YOUR BIKE!! Fits 1993-2007 Price: £21.69 (£25.49 Including VAT at 17.5%)
	Quantity:

	RS125 Pipercross Cone Air Filter This Is A Pipercorss Cone Performance Filter to fit the RS125, it will for both 28mm carburettor and the 34mm carburettor. This IS Just Like The Malossi / Ramair Filter But Is Longer Cone End To It. WARNING YOU WILL NEED TO RE-JET YOUR carburettor WHEN FITTING THIS TO YOUR BIKE!! Price: £21.27 (£24.99 Including VAT at 17.5%)
	Quantity:

	RS 125 Malossi Air Filter This Is A Malossi Performance Filter to fit the RS125, it will for both 28mm carburettor and the 34mm carburettor. WARNING YOU WILL NEED TO RE-JET YOUR carburettor WHEN FITTING THIS TO YOUR BIKE!! Fits 1993-2007 Price: £22.12 (£25.99 Including VAT at 17.5%)
	Quantity:

	RS125 Pipercross Panel Filter Fitts Inside The Std Air Box, No Jetting Required Price: £16.16 (£18.99 Including VAT at 17.5%)
	Quantity:

	RS125 Boysesn Reed Valves This Is A Set Of Boysesn Dual Stage Reed Valve Petels To Fit The RS125 1994-2007 You Will Get Better Throttle Response When You Fit These To Your Bike. Comes With Fitting Instructions And 2 Boyesen Stickers Price: £29.07 (£34.16 Including VAT at 17.5%)
	Quantity:

	RS125 Dellorto 34mm Carburettor For RS125 1994-2006 Dellorto Carburettor 34mm Flat Slide Fits 1994-2006 This is a Proper 34mm Carb to fit the RS125, This Is Not A Cheap Copy ! It Has The Oil Feed Pipe And The Slide Top To Fit The RS125 Throttle Cable. It Comes Ready Jetted To Fit a STD Bike. We Can Advise On Jetting For Mods Like Exhausts Filters etc. Main Jet 160 Needle K57 Pilot Jet B40 You will Need A New Inlet Manifold To Fit This If You Are Replacing The STD 28mm Carb GO ON FREE THE POWER IN YOUR RS125 Price: £119.14 (£139.99 Including VAT at 17.5%)
	Quantity:

	RS125 Dellorto 34mm Carburettor For 2007 Onwards Bike Dellorto Carburettor 34mm Flat Slide Fits 2007 Onwards, It has the pipe to open the fuel tap. This is a Proper 34mm Carb to fit the RS125, This Is Not A Cheap Copy ! It Has The Oil Feed Pipe And The Slide Top To Fit The RS125 Throttle Cable. It Comes Ready Jetted To Fit a STD Bike. We Can Advise On Jetting For Mods Like Exhausts Filters etc. Main Jet 160 Needle K57 Pilot Jet B40 You will Need A New Inlet Manifold To Fit This If You Are Replacing The STD 28mm Carb GO ON FREE THE POWER IN YOUR RS125 Price: £119.14 (£139.99 Including VAT at 17.5%)
	Quantity:

	RS125 28mm Carburettor Inlet Manifold This is the standard 28mm inlet mainfold for the RS125 usually replaced due to cracking. Price: £25.52 (£29.99 Including VAT at 17.5%)
	Quantity:

	RS125 34mm Carburettor Inlet Manifold Inlet Manifold For The RS125 This Is To Fit The Delorto 34mm Carb To Your RS125, This Item Is Made By Rotax So Quality And Fitting Is Excellent. Price: £32.99 (£38.76 Including VAT at 17.5%)
	Quantity:

	34mm Carburettor Inlet 28 Deg Angled !!OUT OF STOCK UNTILL END OF SEPTEMBER !! Inlet Manifold To Fit The 34mm Carb To The Pegaso MX 125, 125/Rally 125/Taureg 125 and the ETX 125 These Bikes Use A 28 Deg Angled Inlet, The Std RS125 One Will Not Fit As The Carb Hits The Shock. Price: £34.03 (£39.99 Including VAT at 17.5%)
	Quantity:

	RS125 Carb Main Jet Dellorto Genuine Dellorto Main Jet For Both 28mm And The 34mm Carb Price: £4.68 (£5.50 Including VAT at 17.5%)
	Quantity: Select Jet Size

	RS125 V-Force 3 Reed Valve System This Is A Moto Tassinari V-Force 3 Reed Valve System For The RS125 Fits Alll Models Moto Tassinari has long been the leader in Reed Valve Technology. No other reed valve manufacturer has direct access to all the Factory Race Teams like Moto Tassinari. Their ongoing relationship with the top names and top teams in motorcycle and snowmobile racing around the world result in thorough testing and product development. The VForce reed valve system is thoroughly tested on the dyno and in real world racing conditions to ensure both maximum performance and durability are acheived before it hits the shelves. You Get What You See In the Photo, Reed Block With Reeds Fitted, Gaskets And A Sticker. INFO ON HOW TO FIT Price: £102.00 (£119.85 Including VAT at 17.5%)
	Quantity:

	V-FORCE-3 Replacement Reeds This Is A Set Of Replacement Reeds For The Aprilia RS125 V-Force3 Reed Valve System. These Will Not Fit On The STD RS125 Reed Valve They Are Only For V-Force-3 ! Price: £39.50 (£46.41 Including VAT at 17.5%)
	Quantity:

	RS125 Jolly Moto Race Exhaust Pipe 0107 Jolly Moto Race Pipe With Carbon Can Jolly Moto Part # 0107 This Is A Race Pipe For The Aprilia RS125, This Pipe Is Best For Fast Road Use With Std Carburettor And Standard Cylinder Porting Price: £245.00 (£287.88 Including VAT at 17.5%)
	Quantity: Sperex VHT High Temp Exhaust Paint Black

	RS125 Jolly Moto Race SP Exhaust Pipe 0111 Jolly Moto Race "SP" Pipe With Carbon Can Jolly Moto Part # 0111 This Is A Race "SP" Pipe For The Aprilia RS125, This Pipe Is Best For Fast Road / Race Use With 34mm Carburettor And Some Cylinder Porting Mods ( Although You Can Use This Pipe With Out Cylinder Porting ) Note This Pipe Will Run With The STD 28mm Carb But is Best With The 34mm, You Can Buy It And Fit A 34mm Carb Later On If You Wish. Price: £272.00 (£319.60 Including VAT at 17.5%)
	Quantity: Sperex VHT High Temp Exhaust Paint Black

		RS125 Jolly Moto Corsa Exhaust Pipe 0115 Jolly Moto Corsa Pipe With Carbon Can Jolly Moto Part # 0115 This Is A Full Race Pipe For The Aprilia RS125, This Pipe Will Need The Cylinder Race Ported, A 34mm Carb And A Free Flowing Air Filter To Get The Best Out Of It. Don't think you can put this on a std engine and it will work it will not! Price: £348.00 (£408.90 Including VAT at 17.5%)
		Quantity: Sperex VHT High Temp Exhaust Paint Black

	RS125 Jim Lomas Stainless Steel Single Can Race Exhaust This Is A Stainless Steel Single End Can Race Exhaust For the RS125 1996-2007 This Comes With A Nice Carbon Kevlar End Can. Made From Stainless Steel It Will Not Rust. Click Here For A Bigger Photo Price: £325.00 (£381.88 Including VAT at 17.5%)
	Quantity:

	RS125 Jim Lomas Stanless Steel Twin End Can Race Exhaust This Is A Stainless Steel Twin End Can Race Exhaust For the RS125 1996-2007 This Comes With A Pair Of Nice Carbon Kevlar End Cans For That Moto GP Look Made From Stainless Steel It Will Not Rust. Click Here For A Bigger Photo Price: £349.00 (£410.08 Including VAT at 17.5%)
	Quantity:

	RS125 Jim Lomas Singel Can Race Exhaust ( Mild Steel With Stainless End Can) This Is A Mild Steel Single End Can Race Exhaust For the RS125 1996-2007 This Comes With A Stainless Steel End Can This one is made from normal steel so will need to be painted to keep it in good condition or it will rust. We recommend Sperex VHT High Temp Exhaust Paint Price: £270.00 (£317.25 Including VAT at 17.5%)
	Quantity: Sperex VHT High Temp Exhaust Paint Black

	RS125 Jim Lomas Singel Can Race Exhaust ( Mild Steel With Carbon End Can) This Is A Mild Steel Single End Can Race Exhaust For the RS125 1996-2007 This Comes With A Carbon Kevlar End Can This one is made from normal steel so will need to be painted to keep it in good condition or it will rust. We recommend Sperex VHT High Temp Exhaust Paint Price: £293.00 (£344.28 Including VAT at 17.5%)
	Quantity: Sperex VHT High Temp Exhaust Paint Black

	RS125 Giannelli Exhaust With Kevlar Can This is a Mild Steel Singel Can Exhaust Made In Italy By GIANNELLI. It Comes With Kevlar Can. This one is made from normal steel so will need to be painted to keep it in good condition or it will rust. We recommend Sperex VHT High Temp Exhaust Paint Please Note Unlike Our Other Exhausts This Is Not A Stock Item So Can Not Guarantee Delivery Time, If Delivery Time Is Important Please Contact To Check Availability . Price: £194.88 (£228.98 Including VAT at 17.5%)
	Quantity: Sperex VHT High Temp Exhaust Paint Black

	RS125 Arrow Race Exhaust Full Arrow Race Exhaust For The RS125 Fits 1995 -2007 Comes With Full Fitting Kit And Carbon Kevlar Can Price: £218.99 (£257.31 Including VAT at 17.5%)
	Quantity:

	RS125 Braking Wavey Front Disc To Fit RS125 1992-2005 BRAKING discs are made from stainless steel with a high percentage of carbon that has a high friction coefficient. The round discs, front and rear, keep the same measurements of the OEM discs, with more performance. Advantages More friction coefficient. Better resistance to the heat. More feeling on the lever. Better handling. Less weight. Price: £136.13 (£159.95 Including VAT at 17.5%)
	Quantity:

	RS125 Braking Wavey Rear Disc To Fit RS125 1992-2005 BRAKING discs are made from stainless steel with a high percentage of carbon that has a high friction coefficient. The round discs, front and rear, keep the same measurements of the OEM discs, with more performance. Advantages More friction coefficient. Better resistance to the heat. More feeling on the lever. Better handling. Less weight. Price: £55.28 (£64.95 Including VAT at 17.5%)
	Quantity:

	RS125 Hel Brake Line Kit Red High performance HEL stainless steel aeroquip complete brake line kit. 2-line kit Single front line and single rear line. Manufactured to the highest possible specification. Braided stainless steel hose, stainless banjos and Red protective sleeve. Complete with stainless steel banjo bolts and copper washers. Price: £38.29 (£44.99 Including VAT at 17.5%)
	Quantity:

	RS125 Hel Brake Line Kit Yellow High performance HEL stainless steel aeroquip complete brake line kit. 2-line kit Single front line and single rear line. Manufactured to the highest possible specification. Braided stainless steel hose, stainless banjos and yellow protective sleeve. Complete with stainless steel banjo bolts and copper washers. Price: £38.29 (£44.99 Including VAT at 17.5%)
	Quantity:

	RS125 Hel Brake Line Kit Blue High performance HEL stainless steel aeroquip complete brake line kit. 2-line kit Single front line and single rear line. Manufactured to the highest possible specification. Braided stainless steel hose, stainless banjos and yellow protective sleeve. Complete with stainless steel banjo bolts and copper washers. Price: £38.29 (£44.99 Including VAT at 17.5%)
	Quantity:

	RS125 Hel Brake Line Kit Carbon Look High performance HEL stainless steel aeroquip complete brake line kit. 2-line kit Single front line and single rear line. Manufactured to the highest possible specification. Braided stainless steel hose, stainless banjos and yellow protective sleeve. Complete with stainless steel banjo bolts and copper washers. Price: £38.29 (£44.99 Including VAT at 17.5%)
	Quantity:

	RS125 NGK Racing Spark Plug BR10EG NGK RACING COMPETITION Spark Plug. This Plug is For All RS125 Unrestricted Engine Price: £5.45 (£6.40 Including VAT at 17.5%)
	Quantity:

	RS125 BI-Tubo Rear Shock Just Look At It Yum Yum. Aprilia RS125 Bi-Tubo Rear Shock, Fully Ajustable For Spring Pre-load, A Nice Fast Road/ Race Shock Click Here For A Bigger Photo Price: £162.95 (£191.47 Including VAT at 17.5%)
	Quantity:

	RS125 NGK IRIDIUM Spark Plug BR10EIX NGK IRIDIUM IX Spark Plug. This Plug is For All RS125 Unrestricted Engine, This The Best Spark Plug For Your RS125 Price: £8.51 (£10.00 Including VAT at 17.5%)
	Quantity:

	RS125 Polini Replacement Piston Kit This is a Replacement Piston Kit For the Polini 154cc Big Bore Kit 60mm Bore. Piston kit contains piston, piston ring, gudgeon pin and 2 circlips. Price: £56.36 (£66.22 Including VAT at 17.5%)
	Quantity:

	RS125 Polini Replacement Top End Gasket Kit This is a Replacement Top End Gasket Kit For the Polini 154cc Big Bore Price: £19.50 (£22.91 Including VAT at 17.5%)
	Quantity: