This is a cylinder for the Cagiva Mito 125 Dome Top Piston With 2 Piston Rings. Will Also Fit The Planet & The Super City.
If Your Top End Has Gone This Is A Full Replacement Kit At A Bargain Price !
The kit comes with Nickasil plated bore, Piston, Piston Rings, G-pin, C-clips, Small End Bearing, 3 Base Gaskets, Cylinder Head O rings, Ex Port Gasket And Reed Gasket
Mitaka Cylinders Are Made in Taiwan and are a Direct Copy of the Original Cylinder
This is a cylinder for the Cagiva Mito 125 Flat Top Piston With 1 Piston Ring. Will Also Fit The Planet & The Super City.
The kit comes with Nickasil plated bore, Piston, Piston Ring, G-pin, C-clips, Small End Bearing, 3 Base Gaskets, Cylinder Head O rings, Ex Port Gasket And Reed Gasket
This is a Mitaka Piston kit made in Taiwan and is Budget piston but of very good quality.
Piston kit contains piston, piston rings, gudgeon pin and 2 circlips.
This Piston Is Suitable For Road Use
The piston has a Teflon coated piston skirt For lower friction Click For More Info
Piston kit contains piston, piston ring, gudgeon pin and 2 circlips.
The piston has a Teflon coated piston skirt For lower friction Click Here For More Info
Prox Pistons kits Are Made in Japan, This Piston Kit Is Best Used In Fast Road And Race Condtions.
Wiseco Part # 853M05600 Piston Size Is 55.95mm
Whether youre into racing or recreation, 2-Stroke Wiseco Pistons have been putting power in motorcycles for over 60 years!
Their aluminum-forged pistons are lighter and more dependable than most cast or hypereutectic pistons, giving you the performance you want. Wiseco uses the worlds most advanced forging process followed by an extensive heat-treat and finishing process that assures performance and reliability for your Cagiva motorcycle.
Wiseco Pison Kit DomeTop Twin Rins For The Cagiva Mito 125cc Also Fits The Planet 125cc And The Super City 125cc.
Wiseco Part # 854M05600 Piston Size Is 55.96mm
Kit contains con-rod, crank pin, big end cage, big end rollers, 2 thrust washers and small end bearing
Kit contains 3 base gaskets, Inner and outer O-rings for the cylinder head, Reed gasket, power valve gasket, and exhaust gasket.
Kit contains 3 base gaskets, Inner and outer O-rings for the cylinder head, Reed gasket, power valve gasket,exhaust gaske, Crank case gasket, clutch cover gaskets water pump gaskets E.T.C
Kit Comes With
2 Koyo Main Crank Bearings C4 Fit, 2 Crankshaft Oil Seals,
1 Sproket Oil Seal,1 Gear Change Shaft Oil Seal
Price is for a pair of main bearings
Just click (add to basket)
Price is for a pair of crank shaft oil seals
You Get 7 Friction Plates And 6 Alloy Plates.
We Buy These Direct From The Manufacture In Italy That Is Why We Can Offer You Them At This Price !!
Moto Tassinari has long been the leader in Reed Valve Technology. No other reed valve manufacturer has direct access to all the Factory Race Teams like Moto Tassinari. Their ongoing relationship with the top names and top teams in motorcycle and snowmobile racing around the world result in thorough testing and product development.
The VForce reed valve system is thoroughly tested on the dyno and in real world racing conditions to ensure both maximum performance and durability are acheived before it hits the shelves.
You Get What You See In the Photo, Reed Block With Reeds Fitted, Gaskets And A Sticker.
These Will Not Fit On The STD Cagiva Mito Reed Valve They Are Only For V-Force-3 !
You Will Get Better Throttle Response When You Fit These To Your Bike.
Comes With Fitting Instructions And 2 Boyesen Stickers
This The Best Spark Plug For Your Cagiva Mito