P J Motorcycle Engineers LTD Derbi Senda 50cc Derbi GPR50 @ PJ Motorcycle Engineers

	Cylinder Re-Sleeving
	Cylinder Re-Boring
	Crank Shaft Rebuilding
	Thread Repairs
	Job Packing

	Piston Kits
	Con-Rod Kits
	Gasket Sets
	Oil Seal Kits
	Main Bearings
	Clutch Baskets

Actinic Catalog by
ADX Media Web Design

Derbi Senda 50cc Derbi GPR50

Online Parts Store > Engine Parts > Street Bike Engine Parts > Derbi Engine Parts > Derbi Senda 50cc Derbi GPR50

	Derbi Senda Cylinder Kit 50cc Derbi Senda - GPR50 Cylinder Kit STD 50cc Comes With Cylinder Head, Alloy Cylinder Nikasil Coated, Piston Kit And Gaskets Price: £97.86 (£114.99 Including VAT at 17.5%)
	Quantity:

	Derbi Senda Budget 70cc Big Bore Kit This Is A Budget 70cc Big Bore Kit For The Derbi Senda Also Fits The GPR50 Cylinder Made From Cast Iron, Alloy Cylinder Head. You Get New Cylinder 47mm New 47mm Cylinder Head Piston Kit Inc Rings, G-Pin Etc, Gaskets And Uprated Clutch Springs Price: £112.00 (£131.60 Including VAT at 17.5%)
	Quantity:

	Derbi Senda Big Bore Kit Metrakit SP Derbi Senda Metrakit SP Series Big Bore Kit Also Fits The GPR50 This Is The Best "Road Bike " Big Bore Kit You Can Buy For Senda 50 - GPR50 , Nice Spread Of Power With A Peak RPM Of 13.000. The Cylinder Is Made From Aluminium And Ni + CSi Treated For Better Performance. Kit Contains Piston Kit 47.60mm,Gaskets Cylinder Head, Cylinder 47.60mm 70cc Price: £184.60 (£216.91 Including VAT at 17.5%)
	Quantity:

	Derbi Senda Piston Kit Derbi Senda Piston Kit Std Replacment 50cc Piston Kit Rings, G-Pin And C-Clips Price: £35.00 (£41.13 Including VAT at 17.5%)
	Quantity:

	Derbi Senda Crankshaft New Crankshaft For The Derbi Senda 50cc Engine. WILL NOT FIT THE GPR 50 ! This Crank Is Much Better Than The Std Item, Comes With Polished Con Rod, Stuffed Crank Webs For Better Crank Case Compression Small End Bearing Precision Ground And Balanced Crank Webs Price: £62.00 (£72.85 Including VAT at 17.5%)
	Quantity:

	Derbi GPR 50 Crankshaft New Crankshaft For The Derbi GPR50cc Engine, Note This Crank Is Only For The GPR 50 Engines ! Comes With Small End Bearing Price: £62.00 (£72.85 Including VAT at 17.5%)
	Quantity:

	Derbi Senda Small End Bearing Qualty Small End Bearing For The Derbi Senda 50 GPR 50 Price: £4.00 (£4.70 Including VAT at 17.5%)
	Quantity:

	Derbi Senda Con Rod Kit Con Rod, Crank Pin, Big End Bearing, 2 Thrust Washers And A Small End Bearing Price: £35.00 (£41.13 Including VAT at 17.5%)
	Quantity:

	Derbi Senda Crankshaft Main Bearings 2 Crankshaft Main Bearings For The Derbi Senda / GPR50 Made In Japan By Koyo Price: £12.60 (£14.81 Including VAT at 17.5%)
	Quantity:

	Derbi Senda 50 Crank Shaft Oil Seals Pair Of Crankshaft Oil Seals To Fit The Derbi Senda 50cc Engine. Price Is For a Pair Price: £9.00 (£10.58 Including VAT at 17.5%)
	Quantity:

	Derbi Senda Crankshaft Main Bearing And Seal Kit Derbi Senda / GPR50 Crankshaft Main bearing And Seal Kit Bearings Are Made In Japan By O.E.M Manufacture KOYO. Seals Are Made In Japan Price is for Pair Of Main Bearings 2 Crank Seals 1 Sproket Seal 1 Gear Shaft Seal 1 Kick Start Seal Price: £25.49 (£29.95 Including VAT at 17.5%)
	Quantity:

	Derbi Senda 50 Full Gasket Set Full Gasket Kit For The Derbi Senda 50 Kit contains 1 base gaskets, cylinder head gasket, 2 Reed gasket, Crank case centre gasket, clutch cover gaskets water pump gasket. Price: £14.58 (£17.13 Including VAT at 17.5%)
	Quantity:

	Derbi Race Clutch Kit Race Clutch Kit For The Senda 50 And The GPR50 Comes With Clutch Plates And Up Rated Springs This Kit Is A Must If You Are Fitting A Big Bore Kit ! Price: £32.89 (£38.65 Including VAT at 17.5%)
	Quantity: